11-03-2006 09:06 AM - edited 03-14-2019 12:14 AM
Callmanager 4.1(3)SR2, IPCC 3.5(3), Agent 4.7.7.4
When I start the Agent I recieve the following error "Recording and Statistics Server is down and is attempting to recover ... Recording and Agent Statistics will be unavailable.". We are not using recording so I'm unsure why this would appear. Any info would be appreciated.
11-09-2006 08:09 AM
Can you check if the following services are running in Apps Server
1. "Cisco Desktop RASCAL Server"
2. "Cisco Desktop VOIP Monitor Server"
02-27-2007 01:14 PM
(new reply to a really old problem)
Neither service is installed on the server. It may have been installed at some point, but is not longer enabled or needed. Is there a way to disable this? An ini-file perhaps?
03-22-2007 09:04 AM
Did you ever get a resolution to this problem? I am actually running into this after a failed upgrade from 3.5(2) to 3.5(4)
03-22-2007 10:54 AM
Unfortunately no one replied to me. I'll have to open a TAC case I guess...
01-29-2008 02:32 AM
What was the final outcome - having the same problems.
Tx - Jim
01-29-2008 03:02 AM
Jim,
I don't recall the specific fix, but it was largely going back over the entire agent configuration ... pay particular attention to the drive mapping to the source files on the IPCC share and checking permissions and/or using full administrative rights.
I dug these install intructions up that I gave to an admin a while back. Substitute your hostname, ip addresses, and whatever user ID you want to use for the share permissions (naturally you need to create this account on the IPCC server and assign permissions):
Log in as the Administrator to the workstation
1. Open the file C:\WINDOWS\system32\drivers\etc\lmhosts (no extension) file with Windows Notepad
a. If only the file lmhosts.sam file exists, copy or rename it to lmhosts (with NO extension)
b. scroll to the bottom of the document and add â
2. Map an available network drive to \\
3. From the Start menu choose Run
4. Enter \\
a. The installation may take some time to start. If the installation does not start within 5 minutes, re-run the command
b. If you receive a warning that the publisher of the application could not be verified, choose OK to run the installer
5. From the Select Options screen, check âAgent Desktopâ, then click Next
6. At the âStart Copying Filesâ screen confirm the following information, then click Next
a. Directory Services Location:
b. Logical Call Center: IPCC LCC
c. Destination location: C:\Program Files\Cisco\Desktop
d. CTI Manager A:
7. The installation is successful when the installation completes and the Agent Desktop icons appear in the start menu
8. Right-mouse click on the Start Menu button and select âExplore All Usersâ
9. Copy the Agent Desktop icon to the âAll Users\Desktop folderâ
10. Log out of Administrator
11. Log back in with user's normal login ID
12. Run the Agent Desktop application and log-in.
Good luck,
Brian
01-29-2008 03:16 AM
Whenever your system config is changed or you want to make sure the agent are getting the right profile at download time, first action would be specially if something got changed in between to do the following:
run the postinstall tool:
C:\Program Files\Cisco\Desktop\bin\Postinstall.exe
The file will update the config files the desktops load when initialising from the network share in 3.5.x systems.
Regards,
Riccardo
01-31-2008 05:22 AM
Thanks for the reply - I finally got tired of trying to find out why it wasn't' working and just formatted and reinstalled everything - this way I knew all the files and registers were not corrupted. After creating all the queue's it appears to working fine.
Jim
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide