06-15-2020 12:49 PM
When we train new CSR's in our office, a trainer will typically sit with a trainee and use a y-connector to listen to their calls and provide assistance as needed. With everyone working remotely, this has become a little more difficult.
Trainers are using Silent Monitoring in Finesse and providing assistance via IM through Jabber. This part isn't so bad.
The harder part is keeping their eyes on their Finesse screen to see when the trainee is taking a call and then clicking the Start Monitoring button to start listening. They tend to miss parts of the call, or calls completely, if they are sidetracked by another task or inquiry.
Is there a way to have a notification pop up on the trainer's desktop when the trainee's Jabber rings/goes to Reserved state? Or does anyone have another suggestion that could help us solve this issue we're experiencing?
06-15-2020 08:51 PM
@Josh K., in my opinion, you will need a custom gadget that will pull the data from UCCX system - gather agent team member states, and then based on the conditions implemented, it will send the UI notification.
The main question is how to pull the data from the system (displaying notification is quite easy job). Here are some ideas on how this can be done:
Both above concepts have one disadvantage - they will give you semi online data as the communication will be always initiated from gadget (gadgets has to send a request for stats). There will always be a time gap between the two consecutive requests.
06-15-2020 09:56 PM
06-15-2020 11:02 PM
I've never tried it, but this might be a good direction to go as it would give access to real time data. The question is - do we have team statistics in XMPP messages?
06-16-2020 02:45 PM
07-20-2020 06:59 AM
Hi
Your requirement can be fulfilled by a 3rd party application "MARS Silent Monitor"
Along with other monitoring features, it has a feature "Continuous Monitoring" which is required by your supervisors.
Supervisor can select a agent for doing continuous silent monitoring.
Whenever the agent connects to a customer call ( Inbound/Outbound) the call monitoring starts automatically.
PFA a shot write-up on the application
Application Video : https://youtu.be/56DvpoXshPc
Continuous Monitoring feature is shown in the video at time 3:50
For more details please write to info@parsec-tech.com
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide