02-14-2011 10:20 AM - edited 03-14-2019 07:22 AM
Hi,
I've got a live system and a lab system both running UCCE 8.0(3)
Due to a fault that was reported after the upgrade to 8.0(3) I have noticed that the Peripheral Variables are not being stored in the Logger database Peripheral_Variable table. By trial and error I have discovered that this can be rectified by changing the following Registry value on the Logger
HKEY_LOCAL_MACHINE\SOFTWARE\Cisco Systems, Inc.\ICM\cus01\LoggerA\Logger\CurrentVersion\HistoricalData\Persistent
Has anybody else come accroos this problem? What could have caused the Regisrty value to be incorrect on both systems?
02-14-2011 01:24 PM
10-03-2011 10:10 AM
Hi,
I have just upgraded UCCE 7.5 to version 8.0.3 per following sequence
1. Upgraded Roggers (HA) to version 8.0.3
2. PG (CTI + CTIOS) to version 8.0.3 and CAD to version 8.0.1a -----------> I have reverted back PG to previous version 7.5 due to the issue with translation route failure during call transfer to csutomer queue
Current Version of UCCE
1. Ropggers (HA) - Version 8.0.3
2. PG (CTI + CTIOS + CAD) to version 7.5
CallManager Version: 7.1.3
IVR Version: 7.0
Can you share your experience with new UCCE version 8.0.3 for any issues if you have.
Anwar Ahmed
10-03-2011 12:36 PM
In a fresh install of 8.0.1 the registry key is set to 0 by default.
So if the customer had changed this to 1 and it some how got changed back to 0 you could check the rcv logs to see if you get any further clues
If someone has manualy changed it you would see something similar as below
20:02:59 Registry changed with Data = 0 for Value = Variable and Key = HistoricalData\Persistent.
20:03:11 Trace: 12% of the available log space is used in XXX_sideA database.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide