cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2670
Views
5
Helpful
4
Replies
Highlighted
Beginner

Unable to enter to "Cisco Unified Serviceability" on UCCX 8.5(1)

Dear support.

I need access to "Cisco Unified Serviceability" to configure the SNMP Community on UCCX 8.5(1).

I have a three passwords types of UCCX: "Application Password", "Administrator Password" and "Security Password"; but I unable to enter to "Cisco Unified Serviceability".

I need support to this issue.

Thanks.

Best regards.

ErnestoG

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Unable to enter to "Cisco Unified Serviceability" on UCCX 8.

Hi Ernesto,

Login with OS administration credentials and do an SSH session to the CCX server.In simple words Command line interface(CLI) of CCX.

Once logged in use the following commands to reset "Cisco Unified serviceability" credentials.

utils reset_application_ui_administrator_name
utils reset_application_ui_administrator_password


Try using a simple password without special character sometimes it does not work.
Nothing breaks if you reset it, so dont worry.





I have posted this picture for further clarification on user accounts for CCX:


 


Regards,
Chuck

Please rate helpful posts and identify correct answers.

4 REPLIES 4
VIP Advisor

Re: Unable to enter to "Cisco Unified Serviceability" on UCCX 8.

EDITED

There are two serviceability sections in UCCX and the logins for each are as follows:

  • Cisco Unified Seviceability - Application Administrator account created during installation.  This is the same account you use with RTMT.
  • Cisco Unified CCX Serviceability - CUCM End User assigned Administrator rights within UCCX Application Administration           

Anthony Holloway

Please use the star ratings to help drive great content to the top of searches.


Anthony Holloway

Please use the star ratings to help drive great content to the top of searches.
Beginner

Unable to enter to "Cisco Unified Serviceability" on UCCX 8.5(1)

Hi Anthony.

I can enter to Cisco Unified CCX Serviceability with application account.

But I can't enter to Cisco Unified Serviceability with application account or administrator account.

It's very rare.

Thanks.

Cisco Employee

Re: Unable to enter to "Cisco Unified Serviceability" on UCCX 8.

Hi Ernesto,

Login with OS administration credentials and do an SSH session to the CCX server.In simple words Command line interface(CLI) of CCX.

Once logged in use the following commands to reset "Cisco Unified serviceability" credentials.

utils reset_application_ui_administrator_name
utils reset_application_ui_administrator_password


Try using a simple password without special character sometimes it does not work.
Nothing breaks if you reset it, so dont worry.





I have posted this picture for further clarification on user accounts for CCX:


 


Regards,
Chuck

Please rate helpful posts and identify correct answers.

Beginner

Unable to enter to "Cisco Unified Serviceability" on UCCX 8.5(1)

Thanks Chuck.

This procedure helped me to retrieve credentials for Unified Serviceability.

Thanks a lot.

EG

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards