xlite and call manager

[janinegraves]

has anyone tried using XLite (open source SIP phone) with CUCM?

If so, what configuration is needed to get it to work.

Thanks, Janine

[Anthony Holloway]

You may have better luck posting in the IP Telephony forum, versus here, in the Contact Center forum.

https://supportforums.cisco.com/community/netpro/collaboration-voice-video/ip-telephony

Unless your comment is specific to Contact Center use with these phones?

[James Hawkins · Accepted solution]

Hi Janine,

Check out this excellent blog posting from William Bell

http://www.netcraftsmen.net/resources/blogs/sip-endpoints-in-cisco-cucm-x-lite-as-an-example.html

Lots of other great UC stuff in his blog - well worth checking out.

[janinegraves]

Thanks, great blog post. How do I mark this question as Answered in the forum? I see a list of Actions - but nothing that looks like 'Mark as Answered'

[James Hawkins]

Hi Janine,

It looks like you marked the answer as correct anyway

There is a help page covering the topic at the link below:

https://supportforums.cisco.com/community/help#discussions_correct

I must admit that I feel slightly lame getting the credit for just pointing you to Bill's blog.

It would be nice if you could maybe +5 rate some of his replies to other questions - you can find these at the link below.

https://supportforums.cisco.com/people/wjbell-ncn

[William Bell]

James,

Thanks for the shout out brother! I appreciate the fact you read my blog. I think that means I need to dust off the "blog topic list" and get cracking!!

Regards,

Bill