Hello all
I am working on my first VOIP/UC project and I'm running into some trouble out of the gate.
I have a 3725 router and access to two IOS images:
advipservicesk9-mz.124-25d and ipvoice-mz-124.25d
I've installed a NM-HD-2V card into the 3725 but when I install the VIC-2FX0 I'm running into issues.
Show Diag yields:
WIC Slot 1:
FXO Voice daughter card (2 port)
WIC module not supported/disabled in this slot
Hardware revision 1.1 Board revision N0
Serial number 30246568 Part number 800-02495-01
FRU Part Number VIC-2FXO=
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 0D 01 01 01 CD 86 A8 50 09 BF 01 00 00 00 00
0x30: B8 00 00 00 03 05 21 01 FF FF FF FF FF FF FF FF
This occurs with either IOS image. Any tips or thoughts on why this occuring? Thank you in advance for any help.
