02-15-2018 08:36 AM - edited 03-17-2019 12:13 PM
Hello
I have small inquiry regarding 4321 with ucse140N for cue 9.0.x virtual
My scenario which i am trying to achive is
Gi 0/0/0
Gi 0/0/0.100 - - - xyz vlan
Gi 0/0/0.120 - - - abc vlan
Gi 0/0/0.104 - - - svi 172.23.104.2 + (voice phones, cimc n esxi, cue ip)
ucse subslot 2/0
imc ip add 172.23.104.5/24
Imc-port dedicated
ucse 0/2/0
ip unnumbered gi 0/0/0
Negotiate auto
Switchport mode trunk
ucse 0/2/1
Negotiate auto
Switchport mode trunk
ip route 172.23.104.5 255.255.255.255 ucse 0/2/0 - - - cimc (even no need bcz of dedicated port)
ip route 172.23.104.6 255.255.255.255 ucse 0/2/0 - - - esxi
SW - - - CME gi 0/0/0
SW - - - ucse ge2
SW - - - laptop
My problem is unable to ping and access esxi after all this. Cimc n router sub interface ping is ok from laptop. Even unable to ping esxi from router
M i missing something or something wrong with this
Pls advice
02-15-2018 09:35 AM
02-15-2018 09:55 AM
Hello N
Yes i saw that doc but my problem and even in this doc with sub interfaces its not mentioned. In my scenario if sub interfaces are there i am not able to reach esxi. I tried everything
But if removersub interface and with normal int settings. I am able to reach esxi n ping etc but only with sub interfaces its not happening n i cracked my head with everything. I dont know why
02-15-2018 01:07 PM
02-16-2018 03:12 AM
Yes pls if you open tac internally, looks like some limitation
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide