01-06-2016 12:20 PM - edited 03-17-2019 05:25 AM
I'm in the process of deploying about 20 7841's. About half of these devices are not registering. They simply state "registering" on the LCD screen. The phones pull an IP address, switchport is up/up and CUCM can ping the device yet they are not registering. As I said, some of the phones register without issue. All services are running on CUCM and all 7841's were imported via BAT file. I have also assigned a DN to each number and associated a user with the phone under "end users". I've also tried deleting one of the phones and recreating to no avail. Any ideas?
Thanks for your time.
Solved! Go to Solution.
01-06-2016 12:47 PM
Are the phone picking up proper option 150 from DHCP?
Have you tried factory reset on these phones? Perhaps they have factory test ITL certs installed on them.
01-06-2016 12:47 PM
Are the phone picking up proper option 150 from DHCP?
Have you tried factory reset on these phones? Perhaps they have factory test ITL certs installed on them.
01-06-2016 12:57 PM
Yes, I only have one 150 option and other phones aren't having trouble. I will try a factory reset on the phones.
01-06-2016 01:01 PM
Also, what is the status messages log showing on the phone?
01-08-2016 05:35 AM
Yeah, looks like factory reset took some time, but now the phones are registering. Thanks!
01-06-2016 10:33 PM
As mentioned by Chris try to delete ITL files as well. This might resolve the problem without factory reset
01-07-2016 12:54 AM
We've recently discovered that Cisco aren't always clearing out the flash at the factory prior to shipping. Reset the security settings and you should be good to go.
GTG
03-05-2020 11:08 PM
Hi all,
We use cisco ip phone 7841with IMS.
We are facing below issue with CISCO SIP devices:
Could someone help us?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide