I've got an issue with a 7911 that I factory reset.
First, I reset using the 123456789*0# key sequence, then pointed option 150 at my laptop and did a Wireshark capture. It keeps trying to download term06.default.loads, which is a bit odd considering it's a 7911. Screen then changes to Cisco logo with bullseye in lower left corner, and it just sits there.
I then came across another reset key sequence - 3491672850*#, which seemed to reset it again, but now when it boots up the screen is blank and I get exactly the same tftp requests as before this reset, except this time it gets stuck in a boot loop.
Is it a brick or is there a way to recover it? I've tried with term06.default.loads from about half a dozen different firmware versions from 7, 8 and 9. It never asks for any other file as it never gets past the first download. Wireshark capture attached. Using tftpd64 on my laptop.
I can assure you the phone is not bricked..Look at a similar thread..Looks like the firmware on the phone cant upgrade to the firmware you are trying to go to. You need to downlaod not just the term default file but all of the file for the required firmware..
The 2021 IT Blog Awards, hosted by Cisco, is now open for submissions. Submit your blog, vlog or podcast by Friday, December 3.
To learn what's new in this year's competition or to gain insights into the judging considerations, check out t...
Greetings, Wanted to share a few lessons learned while migrating from a distributed to centralized IMP deployment. Our current setup included many CUCM/IMP distributed clusters with centralized Expressway server for MRA login. We did not wish to perf...
Parsec's Cisco UCCE/PCCE CC Connector application for CRM works as a bridge between the CRM and Cisco UCCE/PCCE CC solution.The CRM can be any cloud based CRM like Salesforce (SFDC), ServiceNow ,MS Dynamics or a 3rd party CRM.The CRM user/Agent will have ...
It’s a feature which allows CUCM to determine whether the phone is in its home location or a roaming station.By enabling this feature users can roam from one site to another site and acquire the site-specific settings such as Codecs, MRGL, Call rout...