cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
515
Views
0
Helpful
3
Replies

7961G GE Headset Issue

Zafar Ullah
Level 1
Level 1

Headset conversations coming through in parallel on the speaker button of the 7961 phones.Any one got any Idea Please share if you have come across this issue

1 Accepted Solution

Accepted Solutions

Jonathan Schulenberg
Hall of Fame
Hall of Fame

This was how the firmware was written until recently. You can upgrade the firmware to a current release and either it will stop; or, you will get an option on the model-specific settings of the device configuration page to disable that behavior.

Please remember to rate helpful responses and identify helpful or correct answers.

View solution in original post

3 Replies 3

Jonathan Schulenberg
Hall of Fame
Hall of Fame

This was how the firmware was written until recently. You can upgrade the firmware to a current release and either it will stop; or, you will get an option on the model-specific settings of the device configuration page to disable that behavior.

Please remember to rate helpful responses and identify helpful or correct answers.

The phones are 7961G GE  and the firmware SCCP41.9-1-1SR1S.Which is the upgraded version

This is issue is also happening with Model 7965.

Hi Jonathan

Thanks for your help.It has fixed the issue for 7965 but I have come across with cisco Bug Tool

CSCsz35375.which has mentioned that 7961G GE has build in for this.Once again thanks for your help

It is much appreciated

Thanks

Zafar

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: