Adding isdn bri to existing h323 router with isdn e1

[feisalb]

Hello All

How do I add a isdn bri interface to an existing gateway that has e1 configured. Gw is running h323.
Do I add the bri interfaces as a new h323 gw in cucm or can I add it to the existing h323 gw?

Thanks

Sent from Cisco Technical Support iPhone App

[paolo bevilacqua]

You can use the same h.323 VG in CUCM.

Then you cand use steering digits to determined which interface is used for outgoing calls, or other routing for incoming.