10-30-2015 08:31 AM - edited 03-17-2019 04:45 AM
Is there a way in Callmanager to set up a call forward all that doesn't announce that it's a forwarded call? Right now the call arrives at the destination set as "Forwarded for XXXX". I'd like to kill that message if possible.
Thanks!
Justin
10-30-2015 09:18 AM
Did you try unchecking the "Caller Name" setting on the forwarding DN under Forwarded Call Information Display on Device section (bottom)?
10-30-2015 10:40 AM
Piggy backing off of Chris, here is a screen shot. It's at the bottom of the Directory Number Configuration. The page your DN is configured on.
10-30-2015 10:48 AM
I just tried this and it didn't work. Same message displayed at the recieving phone. Thanks though it looked promissing.
10-30-2015 10:53 AM
Did you change it on the DNC of the phone calling or the phone receiving? Did you reset the phone you're using to test after saving the config?
10-30-2015 11:19 AM
I did reset. The change was made on the forwarding set. That's really where I need to control this from. The client does not want users to know the call was forwarded.
10-30-2015 11:54 AM
Ok, that's not working in my test environment either. I unchecked everything and it still shows the transferred caller ID name and ext. Testing something else.....
10-30-2015 12:04 PM
https://supportforums.cisco.com/discussion/10998896/blocking-caller-id-internal-calls
This should do the trick.
10-30-2015 10:58 AM
Did you make the change on the receiving DN?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide