BRI activation

[gabiulici]

      Hii,

I want to activate BRI for a video Conference ( Athera Vega X5 ), any information/steps will be very helpful.

Thanks

[Aman Soi]

Hi Gabriel,

You do not need an extra license for activating BRI card. Did u try connecting straight cable ?

can u  share the show version and sh license feature /show license[for ISR G2] all from the router?

regds,

aman

[gabiulici]

Feature name             Enforcement  Evaluation  Subscription   Enabled  RightToUse

ipbasek9                 no           no          no             yes      no

securityk9               yes          yes         no             no       yes

uck9                     yes          yes         no             yes      yes

datak9                   yes          yes         no             no       yes

gatekeeper               yes          yes         no             no       yes

SSL_VPN                  yes          yes         no             no       yes

ios-ips-update           yes          yes         yes            no       yes

SNASw                    yes          yes         no             no       yes

hseck9                   yes          no          no             no       no

cme-srst                 yes          yes         no             no       yes

WAAS_Express             yes          yes         no             no       yes

UCVideo                  yes          yes         no             no       yes

[Aman Soi]

Hi Gabriel,

there seems to be physical layer connectivity between NT1 [ISDN Terminal Device] and VIC-BRI  card.try connecting straight cable.As per the snapshot , u are using cross-over cable.

can u share the config of router ?

regds,

aman

[techguy]

1	White orange	1	White blue
2	Orange	2	blue
3	White green	3	White green
4	blue	4	White orange
5	White blue	5	orange
6	green	6	green
7	White brown	7	White brown
8	brown	8	brown

[gabiulici]

! Last configuration change at 15:20:26 UTC Fri Jan 17 2014

version 15.2

service timestamps debug datetime msec

service timestamps log datetime msec

service password-encryption

!

hostname test

!

boot-start-marker

boot-end-marker

!

!

card type e1 0 0

logging buffered 51200 warnings

!

no aaa new-model

network-clock-participate wic 0

network-clock-participate wic 2

network-clock-select 1 E1 0/0/0

!

ip cef

!

!

!

ip dhcp excluded-address xxxxx

!

ip dhcp pool ccp-pool

import all

network xxxxx xxxxxxx

default-router xxxx

lease 0 2

!

!

!

no ipv6 cef

multilink bundle-name authenticated

!

!

!

!

isdn switch-type primary-net5

!

!

crypto pki trustpoint TP-self-signed-xxxxxx

enrollment selfsigned

subject-name cn=IOS-Self-Signed-Certificate-xxxxxxx

revocation-check none

rsakeypair TP-self-signed-xxxxxx

!

!

crypto pki certificate chain TP-self-signed-xxxxxxxx

certificate self-signed 01 nvram:IOS-Self-Sig#1.cer

voice-card 0

!

!

!

!

!

!

!

!

license udi pid xxxxxxx1/K9 sn xxxxxxx

hw-module pvdm 0/0

!

hw-module sm 1

!

!

!

username admin privilege 15 secret 4 xxxxxxxxxxxxxxxxxxxxxxxxxxxx2

!

redundancy

!

!

controller E1 0/0/0

pri-group timeslots 1-31 service mgcp

!

controller E1 0/0/1

pri-group timeslots 1-31 service mgcp

!

controller E1 0/0/2

pri-group timeslots 1-31 service mgcp

!

controller E1 0/0/3

pri-group timeslots 1-10,16 service mgcp

!

no ip rcmd domain-lookup

ip rcmd rsh-enable

ip rcmd remote-host admin xxxxx root enable

ip rcmd remote-host routeradmin xxxx admin

ip ssh version 2

!

!

!

!

interface Embedded-Service-Engine0/0

no ip address

shutdown

!

interface GigabitEthernet0/0

description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$

ip address x.x.x.x x.x.x.x

duplex auto

speed auto

!

interface GigabitEthernet0/1

no ip address

shutdown

duplex auto

speed auto

!

interface GigabitEthernet0/2

no ip address

shutdown

duplex auto

speed auto

!

interface BRI0/2/0

no ip address

isdn switch-type basic-net3

isdn tei-negotiation first-call

isdn layer1-emulate network

isdn incoming-voice voice

isdn bind-l3 ccm-manager service mgcp

line-power

!

interface BRI0/2/1

no ip address

isdn switch-type basic-net3

isdn tei-negotiation first-call

isdn layer1-emulate network

isdn incoming-voice voice

isdn bind-l3 ccm-manager service mgcp

line-power

!

ip forward-protocol nd

!

ip http server

ip http authentication local

ip http secure-server

ip http timeout-policy idle 60 life 86400 requests 10000

!

ip route 0.0.0.0 0.0.0.0 x.x.x.x

!

!

!

snmp-server community xxxxxxxx

snmp-server enable traps entity-sensor threshold

!

[Aman Soi]

Hi Gabriel,

config seems to be OK.

Is Layer1 Status still showing Deactivated? If yes,please try changing the cable.

Did u ever try changing NT1 also?

regds,

aman

[gabiulici]

Hii GUys,

I change the cable, make a new one but the same. Maybe I have to bay a new cable because i don't understand what is wrong.....

Omerpal are you sure is the right patch ???

.

[Aman Soi]

Hi Gabriel,

Cable could be one of the cause but u have already tried changing it .

Did u ever try changing NT1 ?

regds,

aman

[gabiulici]

No i don't tray NT1.

[gabiulici]

Hiii.

I find some information, on the router I have a ISDN BRI S/T 1  (2nd generation two port BRI voice interface daughtercard on Slot 0 SubSlot 2 )

and I find I need a ISDN BRI 0 NT1 in order to work with my video Conference Aethra Vega X5.

Maybe I need to buy a NT1 to put between my router and the videoconference, I change 10 times the cable but still not working.

I am not sure what card I need for Aethra Vega X5??????????

Th for help:)

http://www.cisco.com/en/US/prod/collateral/modules/ps5949/data_sheet_c78_439537.pdf

http://hw-server.com/constrc/atm_prog_lpt_shift/programmer.html

[Aman Soi · Accepted solution]

Hi Gabriel ,

If your ISDN service provider is giving U-interface , then, u do not need NT-1 , it can directly plug into device with U-interface.

If your router has S/T interfcae , then , u need NT1 for interface conversion.

regds,

aman

[gabiulici]

I have  2921 with 3 E1 lines and I have ISDN BRI S/T 1 and from Port 0   I want to connect directly to the Video Conference.

[gabiulici]

Hello,

Stil working on this issues.

show interfaces BRI  0/2/0

BRI0/2/0 is up, line protocol is down (spoofing)

  Hardware is Voice NT or TE BRI

  MTU 1500 bytes, BW 64 Kbit/sec, DLY 20000 usec,

     reliability 255/255, txload 1/255, rxload 1/255

  Encapsulation VOICE, loopback not set

  Keepalive set (10 sec)

  Last input 4w3d, output never, output hang never

  Last clearing of "show interface" counters never

  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

  Queueing strategy: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 0 bits/sec, 0 packets/sec

  5 minute output rate 0 bits/sec, 0 packets/sec

     3 packets input, 19 bytes, 0 no buffer

     Received 0 broadcasts (0 IP multicasts)

     0 runts, 0 giants, 0 throttles

     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort

     16 packets output, 123 bytes, 0 underruns

     0 output errors, 0 collisions, 21 interface resets

     0 unknown protocol drops

     0 output buffer failures, 0 output buffers swapped out

     29 carrier transitions

show version

3 Gigabit Ethernet interfaces

104 Serial interfaces

2 ISDN Basic Rate interfaces

1 terminal line

4 Channelized E1/PRI ports

show controller bri 0/2/0

BRI unit 9:

layer 1 operating in LT-S mode.

Layer 1 is DEACTIVATED. (ISDN L1 State G1)

D Channel Information:

idb at 0x21B6BD70, driver data structure at 0x3C832C08

Infineon Chip Version 0x1

Infineon Registers:

Int. Status Register [ISTA]=0x00, Aux. Int. [AUXI]=0x00

D-channel: Int. Status Reg: [ISTAD]=0x00, Status. Reg: [STARD]=0x40

Mode Reg: [TR_MODE]=0x03

Transceiver Reg: [TR_CONF0]=0x00

Test mode Reg: [TMD]=0x00

IOM Control Reg: [IOM_CR]=0x08

Status Register [STAR]=0x40, Mode Register [MODED]=0xCA

Serial Data Strobe Control Reg: [SDS1_CR]=0x00, [SDS2_CR]=0x00

RX Buffer Descriptor is at 0x3C832F24, Buffer size 1524

pak=0x22BE0038 data_ptr=0xE25E654 partial_size=0x0