Bulk Administration/Insert Phones in CUCM Version 9

[chrysostomos1980]

Hi Guys

I used the attached csv file for insert phones in cucm version 9.I recieve errors so it seems that in cucm version 9 the format is different than previous versions , because in cucm version 7-8 this format was correct

Could you give some lights??

Regards

chrysostomos

[Rob Huffman]

Hi Chrysostomos,

Hope life is treating you well "C"

What is the error you receive?

Have you tried exporting a test phone and comparing the fields

to see where the difference may lie?

There are some great tips from Shalu in this nice doc;

https://supportforums.cisco.com/docs/DOC-27325

Cheers!

Rob

"Spend your life waiting,
for a moment that just don't come,
Well, don't waste your time waiting" 

-Springsteen

[Jaime Valencia]

There have always been changes in BAT, well, not in BAT itself, but in the fields for phones, the name of the fields, which are new, which are mandatory, etc.

So, it's really not surprising an old file doesn't work

I usually do as Rob says, config a phone and do an export all to compare what's new.

+5 to Rob

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

[Rob Huffman]

Right back at ya Java-Man +5

Cheers!

Huff

"Clocks go slow in a place of work
Minutes drag and the hours jerk" 

-The Clash

[chrysostomos1980]

Hi Jaime and Rob

Everything its ok here i hope and you

Below is the error that i get

I double check the output from the export phones(detail export) and all are correct.I have upload th csv file base in specific Details

something missing for sure but what

If you can view the files i will appreciated

attached export: is the export with ALL details

attached test11: is the uploaded csv file

Error:

Insert Phones - Specific Details

Begin Time : 02/01/2013 18:57:39

Query :

Insert Phones in /common/bps/csvfiles/phones/insert/specific/test11.csv

Failure Details :

MAC Address/Device Name Error Code Error Description

-----------------------------------------------------------------------------------------

64AE0C5FB8BE Line number 1 is not configured for Line on the template.

Result Summary :

INSERT for 0 PHONES passed.

INSERT for 1 PHONES failed.

End Time : 02/01/2013 18:57:39

[Aaron Harrison]

Hi

Might be asking the obvious here, but are you sure you have configured a line on the phone template you are choosing for this BAT job?

Can you screen grab the template if you aren't sure?

Aaron

[Rob Huffman]

Hi Chrysostomos,

The error seems to be pointing towards the Template you

are using in conjunction with the .csv

Try to create a line-template, open the Device Template you  created, and click on the add line option on the left of the page. Assign a template name, and configure  all the settings that you wish to assign to all your DNs that use this  device-template, such as Partition, CSS, VM Profile, Forward CSS's

Cheers!

Rob

"Clocks go slow in a place of work
Minutes drag and the hours jerk" 

-The Clash

[chrysostomos1980]

Rob

I didnt understand what you mention

can you send an example?

Thnak you in advance

[Rob Huffman · Accepted solution]

Hi Chrysostomos,

Sory man.....not @ CUCM right now to send any type of example

Go back to the Template you created for your insert testing and look for

"Add a line" or create a new test Template and when doing the config

look for "add a line."

It's because of this error from your post above;

Line number 1 is not configured for Line on the template.

Cheers!

Rob

"Clocks go slow in a place of work
Minutes drag and the hours jerk" 

-The Clash

[chrysostomos1980]

Thanks again Rob

when i stuck i will reurn back

[chrysostomos1980]

Rob

Now i catch what you mention

Add A NEw Line Appearance at the right top of the page

Ouff!!

Thank you

Now its ok

[Rob Huffman]

Hey Chrysostomos,

Nice work buddy! I always have to play with BAT

when I'm using it to get my settings perfect before using

it on multiple phones

Cheers!

Rob

"Clocks go slow in a place of work
Minutes drag and the hours jerk" 

-The Clash