cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
971
Views
0
Helpful
8
Replies

Call to PSTN required PIN SIP Phones

aelankoud
Beginner
Beginner

Hi Experts,

All IP Phones configured by SIP Protocol, for call security I want if someone wants to start a call to the outside (PSTN) he's obliged to enter his own PIN, Is there a way to configure that on CME 11.0 ?

thank you.

8 REPLIES 8

Brandon Buffin
Advisor
Advisor

You can use Forced Authorization Codes.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmefac.html

Brandon

Hi Brandon,

thank you for your quickly reply.

I have already configured this feature (FAC), but it doesn't work, when I start a call to PSTN, the IP Phone doesn't ask me the PIN, Here is the config :

voice lpcor enable
voice lpcor custom
 group 1 INTERNE
 group 2 FIX-NATIONAL
 group 3 FIX-GSM-NATIONAL
!
voice lpcor policy INTERNE
!
voice lpcor policy FIX-NATIONAL
 accept INTERNE fac
 accept FIX-NATIONAL fac
 service fac
!
voice lpcor policy FIX-GSM-NATIONAL
 accept INTERNE fac
 accept FIX-NATIONAL fac
 service fac
!
voice register pool  31
 busy-trigger-per-button 2
 id mac 70D3.7946.53F5
 type 7821
 number 1 dn 47
 cor incoming FIX-GSM-NATIONAL default
 cor outgoing FIX-GSM-NATIONAL default
 dtmf-relay rtp-nte
 voice-class codec 100
 username 1031 password cisco
 pin 1111
 no vad
 
 dial-peer voice 20 pots
 cor outgoing FIX-GSM-NATIONAL
 description ## the Calls to PSTN (FIX, GSM, Green Numbers) ##
 destination-pattern 0[5-8]........
 progress_ind setup enable 3
 progress_ind alert enable 8
 no digit-strip
 direct-inward-dial
 port 0/1/0:15
 forward-digits all

thank you.

Youssef.

Do you have the auth package configured such as:

application
package auth
 param passwd-prompt flash:en_bacd_welcome.au
 param passwd 54321
 param user-prompt flash:en_bacd_enter_dest.au
 param term-digit #
 param abort-digit *
 param max-digits 32

Do you have the username password configured such as:

username 786 password 0 54321

See the configuration example here:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmefac.html

This configuration that you gave me is for a single PIN Code
I want every IP Phone has its PIN Code, 50 PIN Codes for 50 IP Phones

thank you again.

Youssef.

So you would need 50 usernames/passwords:

username 786 password 0 54321
username 787 password 0 98765
username 789 password 0 12345

. . . . . . . .

One solution would be to make the usernames match extensions.

thank you,

But in this one will encounter another problem, each user can make calls from each IP Phone to the outside (PSTN).
I would like every user can just make PSTN calls, only by his phone or by his number.

And how I can download the audios (en_bacd_enter_dest.au, en_bacd_welcome.au), I have not found it in Cisco website

Youssef.

Hello 

 

Did you find a solution for this problem please 

 

Best regards 

zineb
Beginner
Beginner

Hello 

 

Did you find a solution for this problem please 

 

Best regards 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: