08-07-2017 11:48 AM - edited 03-17-2019 10:58 AM
Hi Experts,
All IP Phones configured by SIP Protocol, for call security I want if someone wants to start a call to the outside (PSTN) he's obliged to enter his own PIN, Is there a way to configure that on CME 11.0 ?
thank you.
08-07-2017 11:58 AM
You can use Forced Authorization Codes.
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmefac.html
Brandon
08-07-2017 12:33 PM
Hi Brandon,
thank you for your quickly reply.
I have already configured this feature (FAC), but it doesn't work, when I start a call to PSTN, the IP Phone doesn't ask me the PIN, Here is the config :
voice lpcor enable
voice lpcor custom
group 1 INTERNE
group 2 FIX-NATIONAL
group 3 FIX-GSM-NATIONAL
!
voice lpcor policy INTERNE
!
voice lpcor policy FIX-NATIONAL
accept INTERNE fac
accept FIX-NATIONAL fac
service fac
!
voice lpcor policy FIX-GSM-NATIONAL
accept INTERNE fac
accept FIX-NATIONAL fac
service fac
!
voice register pool 31
busy-trigger-per-button 2
id mac 70D3.7946.53F5
type 7821
number 1 dn 47
cor incoming FIX-GSM-NATIONAL default
cor outgoing FIX-GSM-NATIONAL default
dtmf-relay rtp-nte
voice-class codec 100
username 1031 password cisco
pin 1111
no vad
dial-peer voice 20 pots
cor outgoing FIX-GSM-NATIONAL
description ## the Calls to PSTN (FIX, GSM, Green Numbers) ##
destination-pattern 0[5-8]........
progress_ind setup enable 3
progress_ind alert enable 8
no digit-strip
direct-inward-dial
port 0/1/0:15
forward-digits all
thank you.
Youssef.
08-07-2017 12:52 PM
Do you have the auth package configured such as:
application package auth param passwd-prompt flash:en_bacd_welcome.au param passwd 54321 param user-prompt flash:en_bacd_enter_dest.au param term-digit # param abort-digit * param max-digits 32
Do you have the username password configured such as:
username 786 password 0 54321
See the configuration example here:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmefac.html
08-07-2017 01:04 PM
This configuration that you gave me is for a single PIN Code
I want every IP Phone has its PIN Code, 50 PIN Codes for 50 IP Phones
thank you again.
Youssef.
08-07-2017 01:28 PM
So you would need 50 usernames/passwords:
username 786 password 0 54321
username 787 password 0 98765
username 789 password 0 12345
. . . . . . . .
One solution would be to make the usernames match extensions.
08-07-2017 05:47 PM
thank you,
But in this one will encounter another problem, each user can make calls from each IP Phone to the outside (PSTN).
I would like every user can just make PSTN calls, only by his phone or by his number.
And how I can download the audios (en_bacd_enter_dest.au, en_bacd_welcome.au), I have not found it in Cisco website
Youssef.
02-24-2020 07:14 AM
Hello
Did you find a solution for this problem please
Best regards
02-26-2020 03:18 AM
Hello
Did you find a solution for this problem please
Best regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide