can we setup final destination on the fly for a hunt-group on CME 7.1?

[jjia]

Hi,

CME 7.1 with CUE 7.0.

The requirement is: 5 agents dynamically join/leave the hunt-group(use Hlog). when all the agents left the hunt-group, one agent can have the option to forward the hunt-pilot call to his cell phone. Each day different agent will setup the agent's personal different cell phone number.

I am wondering if anyone can provide me a hint for the above requirement.

Right now, I have a workaround is to configure the final destination to a spare physical phone first line, and from that phone, setup callforwardall to the cell phone on the fly. But this way will require a physical phone.

Thanks,

JJ

[paolo bevilacqua]

Configure that DN on a second button of one or more multibutton phones.

Press it before CfwdAll.

Done.

[jjia]

cfwdall setting from phone interface only applies to the first button which is not our case (we configured the first button as the hunt-group member).

Not sure if end-user(not administrator) can setup phone button cfwd setting from end-user webpage of CUE. Will try that.

Any more idea?

Thanks,

JJ

[jjia]

Maybe I can try to configure the 2nd or 3rd button as shared line which is the final destination, and to see if SNR feature can work on the 2nd/3rd extension although CME 7.1 SNR says:

"Each IP phone supports only one SNR directory number. "---it didn't mention if it must be the primary button extension.

[paolo bevilacqua · Accepted solution]

No, if you press the line button before, you can CfwdAll any line on a phone. Just make sure seized state had the softkey.

Of course you can also CFA from the user page that "owns" the DN.

[jjia]

You are right!

Thanks for your pointing. Great!

[paolo bevilacqua]

You're welcome, thanks for the nice rating and good luck!