cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1454
Views
0
Helpful
1
Replies

Cbarge in CME "Failed to Cbarge In"

uthth1971
Level 1
Level 1

Hi all

I would much appreciate if someone can help me to overcome the following issue. I have configured a Cbarge feature in CME and due to the hardware conference issue I am not able to test the feature. It is giving me the error message as “ Failed to Barge in”

I know it is a hardware conference issue, however I don’t find any mistake in the config and the hardware conference is associated successfully with CME.

Please see the detail and give me a direction as where I am making the mistake…… it is killing my time

Thanks

PVDM2 - Details

=====

Slot0:

PVDM Slot 1:
        48-channel (G.711) Voice/Fax PVDMII DSP SIMM PVDM daughter card
        Hardware Revision        : 4.0
        Part Number              : 73-8540-05
        Board Revision           : A0
        Deviation Number         : 0
        Fab Version              : 04
        PCB Serial Number        :

        RMA Test History         : 00
        RMA Number               : 0-0-0-0
        RMA History              : 00
        Processor type           : 00
        Product (FRU) Number     : PVDM2-48
        Version Identifier       : V01
        EEPROM format version 4
        EEPROM contents (hex):
          0x00: 04 FF 40 03 ED 41 04 00 82 49 21 5C 05 42 41 30
          0x10: 88 00 00 00 00 02 04 C1 8B 46 4F 43 31 30 34 34
          0x20: 33 57 31 43 03 00 81 00 00 00 00 04 00 09 00 CB
          0x30: 88 50 56 44 4D 32 2D 34 38 89 56 30 31 20 D9 02
          0x40: 40 C1 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
          0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

=================Config-=================

voice-card 0
dspfarm
dsp services dspfarm
!
sccp local FastEthernet0/0.105
sccp ccm 142.105.66.254 identifier 1 priority 1 version 7.0
sccp
!
sccp ccm group 1
bind interface FastEthernet0/0.105
associate ccm 1 priority 1
associate profile 2 register myconf
associate profile 1 register mytrans
keepalive retries 5
keepalive timeout 5
!
dspfarm profile 1 transcode 
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 3
associate application SCCP
!
dspfarm profile 2 conference 
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 2
associate application SCCP


telephony-service
sdspfarm units 2
sdspfarm transcode sessions 3
sdspfarm tag 1 mytrans
sdspfarm tag 2 myconf
conference hardware

=================================

abc#sh dsp
abc#sh dspfarm all
Dspfarm Profile Configuration

Profile ID = 1, Service = TRANSCODING, Resource ID = 1 
Profile Description : 
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : SCCP   Status : ASSOCIATED
Resource Provider : FLEX_DSPRM   Status : UP
Number of Resource Configured : 3
Number of Resource Available : 3
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30
Codec : g711alaw, Maximum Packetization Period : 30
Codec : g729ar8, Maximum Packetization Period : 60
Codec : g729abr8, Maximum Packetization Period : 60
Dspfarm Profile Configuration

Profile ID = 2, Service = CONFERENCING, Resource ID = 2 
Profile Description : 
Profile Service Mode : Non Secure
Profile Admin State : UP
Profile Operation State : ACTIVE
Application : SCCP   Status : ASSOCIATED
Resource Provider : FLEX_DSPRM   Status : UP
Number of Resource Configured : 2
Number of Resource Available : 2
Codec Configuration
Codec : g711ulaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g711alaw, Maximum Packetization Period : 30 , Transcoder: Not Required
Codec : g729ar8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729abr8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729r8, Maximum Packetization Period : 60 , Transcoder: Not Required
Codec : g729br8, Maximum Packetization Period : 60 , Transcoder: Not Required


SLOT DSP VERSION  STATUS CHNL USE   TYPE    RSC_ID BRIDGE_ID PKTS_TXED PKTS_RXED

0    5   23.8.1   UP     N/A  FREE  xcode  1      -         -         -       
0    5   23.8.1   UP     N/A  FREE  xcode  1      -         -         -       
0    5   23.8.1   UP     N/A  FREE  xcode  1      -         -         -       
0    7   23.8.1   UP     N/A  FREE  conf   2      -         -         -       
0    7   23.8.1   UP     N/A  FREE  conf   2      -         -         -      

Total number of DSPFARM DSP channel(s) 5

=================== Debug during Cbarge====================

debug ephone hw-conference

Jun 26 03:41:27.694: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0

Jun 26 03:41:27.694: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0

Jun 26 03:41:27.706: Check associated hwconf with callid 15

Jun 26 03:41:27.710: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0

Jun 26 03:41:27.710: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0

Jun 26 03:41:30.602: Check associated hwconf with callid 15

Jun 26 03:41:30.990: SkinnyHwconfBridgeMedia:dn = 4, chan 1, phone = 1 stream 0

Jun 26 03:41:30.990: SkinnyHwconfBridgeMedia:Call not in conference

Jun 26 03:41:31.587: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0

Jun 26 03:41:31.587: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0

Jun 26 03:41:33.183: SkinnyCBargeButtonPress: New adhoc conf barge

Jun 26 03:41:33.183: skinny_hwcfb_get_adhoc_number:

Jun 26 03:41:33.183: SkinnyCBargeButtonPress: New adhoc conf barge: setup failed!

Jun 26 03:41:44.523: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0

Jun 26 03:41:44.559: SkinnyHwconfConfSKButtonSet:for dn 4 chan 1 set=0 conf_sk=0

===================When I try to conference =========================

un 26 03:45:08.777: SkinnyHideAdhocConfNumber for dn=2 chan=1 streamID=0
Jun 26 03:45:08.785: Check associated hwconf with callid 17
Jun 26 03:45:08.789: SkinnyHideAdhocConfNumber for dn=2 chan=1 streamID=0
Jun 26 03:45:09.869: Check associated hwconf with callid 17
Jun 26 03:45:10.253: SkinnyHwconfBridgeMedia:dn = 2, chan 1, phone = 1 stream 0
Jun 26 03:45:10.253: SkinnyHwconfBridgeMedia:Call not in conference
Jun 26 03:45:10.589: SkinnyHideAdhocConfNumber for dn=2 chan=1 streamID=0
Jun 26 03:45:11.445: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0
Jun 26 03:45:15.857: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0
Jun 26 03:45:15.881: SkinnyHideAdhocConfNumber for dn=3 chan=1 streamID=0
Jun 26 03:45:16.589: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0
Jun 26 03:45:16.589: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0
Jun 26 03:45:17.841: SkinnyHwconfBridgeMedia:dn = 3, chan 1, phone = 0 stream 0
Jun 26 03:45:17.841: SkinnyHwconfBridgeMedia:Call not in conference
Jun 26 03:45:17.889: SkinnyHwconfBridgeMedia:dn = 4, chan 1, phone = 1 stream 0
Jun 26 03:45:17.889: SkinnyHwconfBridgeMedia:Call not in conference
Jun 26 03:45:18.589: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0
Jun 26 03:45:18.589: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0
Jun 26 03:45:22.017: SkinnyAddDnToHwConference: phone=1 (dn=2 chan=1 state=9) (conf_dn=4 conf_chan=1 state=4)
Jun 26 03:45:22.017: SkinnyAddDnToHwConference: New adhoc conference
Jun 26 03:45:22.017: skinny_hwcfb_get_adhoc_number:
Jun 26 03:45:22.017: SkinnyAddDnToHwConference: Adhoc new conference setup failed!
Jun 26 03:45:23.817: SkinnyHideAdhocConfNumber for dn=4 chan=2 streamID=0
Jun 26 03:45:28.165: SkinnyHideAdhocConfNumber for dn=4 chan=2 streamID=0
Jun 26 03:45:28.193: SkinnyHwconfConfSKButtonSet:for dn 4 chan 2 set=0 conf_sk=0
Jun 26 03:45:30.461: SkinnyHideAdhocConfNumber for dn=2 chan=1 streamID=0
Jun 26 03:45:30.481: SkinnyHwconfConfSKButtonSet:for dn 2 chan 1 set=0 conf_sk=0
Jun 26 03:45:34.161: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0
Jun 26 03:45:34.161: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0
Jun 26 03:45:34.321: SkinnyHwconfBridgeMedia:dn = 4, chan 1, phone = 1 stream 0
Jun 26 03:45:34.321: SkinnyHwconfBridgeMedia:Call not in conference
Jun 26 03:45:35.277: SkinnyHideAdhocConfNumber for dn=4 chan=1 streamID=0
Jun 26 03:45:35.313: SkinnyHideAdhocConfNumber for dn=3 chan=1 streamID=0
Jun 26 03:45:35.317: SkinnyHwconfConfSKButtonSet:for dn 4 chan 1 set=0 conf_sk=0
Jun 26 03:45:35.317: SkinnyHwconfConfSKButtonSet:for dn 3 chan 1 set=0 conf_sk=0

================================================================

As trouble shooting step, I trying to add the " conference ad-hoc under the ephone-dn ( otc-lie), it is giving me error)

Abc(config-ephone-dn)#conference ad-hoc
DN 4 is tied to ephone 1 button 3
Remove dn 4 from the ephone button config

If i remove the button, I am not able to share the line with 2 phone for Cbarge

thanks for your help and time

1 Accepted Solution

Accepted Solutions

Hi, you are not configuring the conference DN properly. Create the DN like below:

!

ephone-dn x octo-line

number A100

conference ad-hoc

!

ephone-dn y octo-line

number A101

conference ad-hoc

!

Never think to use any existing DN (which is used on any phone) as conference DN. Also 'number A100/A101' means it's not dialable by any user mistakenly, only system can call the DN.

HTH.

Please rate helpful posts!

View solution in original post

1 Reply 1

Hi, you are not configuring the conference DN properly. Create the DN like below:

!

ephone-dn x octo-line

number A100

conference ad-hoc

!

ephone-dn y octo-line

number A101

conference ad-hoc

!

Never think to use any existing DN (which is used on any phone) as conference DN. Also 'number A100/A101' means it's not dialable by any user mistakenly, only system can call the DN.

HTH.

Please rate helpful posts!