Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
Hi,I'm using the unity 4.2 integrating with CUCM.Create the call handler for Auto Attendant.In the CCM side we configured the CTI RP forwarded to the VMAIL call handler.When we dialed the AA number ,we got the welcome greetings , when the moment we d...
Hello All, I am using SSL VPN to connect to my office network but, when I start up the CIPC software it does not recieve the default tftp setting from the Call Manager Express. I keep getting a mess...
Hi all,I have CUCMBE 7.1.3. I have hunt pilot number 6000 with hunt group member are 6001 and 6002. If I call to outside, I can use calling party's External Phone number Mask. When I call from 6001 to outside number, called number will see my number ...
Hi all,I have CUCMBE 7.1.3. I have Hunt pilot number 6001, with hunt group members 6002 & 6003. I create end user in CUCM administration, give telephone number 6002 and associate devices with ext 6002 & 6003. The primary ext is 6002.In Unity Connecti...
hi,can anybody tell me the major differences b/w 4X CUCM and 7X CUCMregardsgaurav
hi! I'm new to cisco call manager. I would like to find out what's the ways to configure a broadcast group, and when internal or external user call to this particular number eg. 1234, the ext 1111, 2222 and 3333 within that group will ring at a same ...
Hi,i want the major difference b/w MGCP and H.323 protcol
Hi guys,can anyone of you supply required steps to implement BLF using EM (Device profile).When i configure BLF/SD i can only use button as SD (i cannot monitor line)Regrads,Alessandro.
Hi, can anyone tell me if CUCM 7.1.3 runs ok in VMWARE (ESX3.5) I am trying to upgrade but when it re-boots I get error of :kernel panic- not syncing: attempted to kill initthanksCliff
Greeting, I am new to Cisco system and I have an urgent problem.My teacher asked me to a VoIP question. The requirements are stated below:1. We have 4 IP phones, and each of them has a independent telephone number. Our company has an old telephone ...
Hi allI would much appreciate if someone can help me to overcome the following issue. I have configured a Cbarge feature in CME and due to the hardware conference issue I am not able to test the feature. It is giving me the error message as “ Failed ...
Hello All, I am running CME but and using the CIPC version 7 softphone. When I load the CIPC software on a windows 7 machine the software states it cannot find the default ...
Does anyone know if there is a way to implement an audible alert when a new voicemail arives on a 7921? CUCM 6.1.
I am trying to delete a Subscriber from Unity 5.0(1). When I do so, I get the error "Delete Failed 0x8004010F". There is nothing else that I can see that seems to be wrong. Suggestions?
aHello I have not access CUCM I get this messaje Database Communication Erroradmin:admin:utils dbreplication status -------------------- utils dbreplication status -------------------- Fri Jun 25 10:45:23 CDT 2010:main:General SQL failure:Fri Jun 2...
