02-26-2021 06:03 AM
I'm trying to just do a simple port connection test from my Presence server to my backup server. We send files via SFTP, so something similar to 'telnet backup-server-name 22' was what I was looking for. That's not recognized from CLI for Presence server. Then figured it might be some type of 'utils' command.
Anyone know how to do this real quick? Thanks.
Solved! Go to Solution.
02-26-2021 07:43 AM
The commands for network connectivity would be utils network.
admin:utils network
utils network arp*
utils network capture
utils network capture-rotate
utils network connectivity
utils network host
utils network ipv6*
utils network name-service*
utils network ping
utils network traceroute
02-26-2021 07:43 AM
The commands for network connectivity would be utils network.
admin:utils network
utils network arp*
utils network capture
utils network capture-rotate
utils network connectivity
utils network host
utils network ipv6*
utils network name-service*
utils network ping
utils network traceroute
02-26-2021 01:13 PM
Hi
Please use below for your specifif purpose
utils network connectivity [hostname/ip address] [port-number] [timeout]
Regards,
If this answered your question, please click "Accept as solution"
If you find this response useful, please mark it as "Helpful"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide