cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
9204
Views
15
Helpful
4
Replies

Cisco 7841 Replace an existing phone. Asking for Primary extension/PIN

Will Pettit
Level 1
Level 1

Hi, 

We have a few new (probably refurbished) 7841's that when you boot them up, ask for a Primary Extension and PIN as part of migrating a phone. 

We have never set up the phone migration settings. The phone is configured in CUCM.

I've tried resetting the settings, but it doesn't work.

 

Is there a quick fix for this?

 

Thanks

1 Accepted Solution

Accepted Solutions

If you are registering the phone manually by adding MAC address, i assume that the phone gets registered.

What if you press cancel option. Let me test this on my lab tomorrow.

 

 



Response Signature


View solution in original post

4 Replies 4

Learn how easy it is to modernize your Cisco IP phones, using one of three options, with the new version of Cisco Unified Communications Manager. See more about Unified Communications from Cisco at https://www.cisco.com/c/en/us/products/unified-communications/index.html

Thanks, we register them manually. I don't get an option to provision a new phone, so how do I get passed this?

If you are registering the phone manually by adding MAC address, i assume that the phone gets registered.

What if you press cancel option. Let me test this on my lab tomorrow.

 

 



Response Signature


Hi, 

 

Ok, I am a complete idiot. I had a typo on the mac address. However, yes, pressing cancel does work. It wasn't working previously due to my stupidity!