cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
9580
Views
5
Helpful
4
Replies

Cisco 8831 Firmware Upgrade

Hello Everyone,

I am trying to upgrade the firmware on Cisco 8831 conference phones but getting the error as per the screenshot. Any suggestions on how to deal with this?

Thanks

1 Accepted Solution

Accepted Solutions

Rob Huffman
Hall of Fame Community Legend Hall of Fame Community Legend
Hall of Fame Community Legend

Hi Inderpreet,

To upgrade the firmware for a 8831 from 9-3-3 to 10-3-1 there other steps required as detailed below;

Install Firmware on Cisco Unified Communications Manager

Before You Begin

Before using Cisco Unified IP Phone Firmware Release 10.3(1) with Cisco Unified Communications Manager, you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.


Note


For Firmware Release 10.3(1), there are special steps required to update phones that are running Firmware Release 9.3(3) or Release 9.3(3)ES9.


Procedure
    Step 1   Go to the following URL:

    http:/​/​www.cisco.com/​cisco/​software/​navigator.html?mdfid=268437892&flowid=5293

    Step 2   Choose Cisco Unified IP Phones 8800 Series.
    Step 3   Choose Cisco Unified IP Conference Phone 8831.
    Step 4   Choose Session Initiation Protocol (SIP) Software.
    Step 5   In the Latest Releases folder, choose 10.3(1).
    Step 6   For phones that are running Firmware Release 9.3(3), perform the following steps.
    1. Select the file cmterm-8831-sip.9-3-3-TO-10-3-1-v2.cop.sgn, click the Download Now or Add to cart button, and follow the prompts.
      Note   

      If you added the firmware file to the cart, click the Download Cart link when you are ready to download the file.

    2. Click the + next to the firmware file name in the Download Cart section to access additional information about this file. The hyperlink for the readme file is in the Additional Information section, which contains installation instructions for the corresponding firmware:

      cmterm-8831-sip.9-3-3-TO-10-3-1-v2-readme.html

    3. Follow the instructions in the readme file to install the firmware.

    From these release notes;

    http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8831/firmware/10_3_1/english/release_note/CS38_BK_CF3CC967_00_cisco-unified-ip-conference-phone/CS38_BK_CF3CC967_00_cisco-unified-ip-conference-phone_chapter_00.html#CS38_TP_I38B1C80_00

    Here's the link to the Readme referenced above;

    http://www.cisco.com/web/software/282074288/118220/cmterm-8831-sip.9-3-3-TO-10-3-1-v2-readme.html

    Cheers!

    Rob

    View solution in original post

    4 Replies 4

    Aaron O'Hare
    Beginner
    Beginner

    What version are your phones on currently?

    AJ

    Currently, I am using: sip8831.9-3-3-5

    Rob Huffman
    Hall of Fame Community Legend Hall of Fame Community Legend
    Hall of Fame Community Legend

    Hi Inderpreet,

    To upgrade the firmware for a 8831 from 9-3-3 to 10-3-1 there other steps required as detailed below;

    Install Firmware on Cisco Unified Communications Manager

    Before You Begin

    Before using Cisco Unified IP Phone Firmware Release 10.3(1) with Cisco Unified Communications Manager, you must install the latest firmware on all Cisco Unified Communications Manager servers in the cluster.


    Note


    For Firmware Release 10.3(1), there are special steps required to update phones that are running Firmware Release 9.3(3) or Release 9.3(3)ES9.


    Procedure
      Step 1   Go to the following URL:

      http:/​/​www.cisco.com/​cisco/​software/​navigator.html?mdfid=268437892&flowid=5293

      Step 2   Choose Cisco Unified IP Phones 8800 Series.
      Step 3   Choose Cisco Unified IP Conference Phone 8831.
      Step 4   Choose Session Initiation Protocol (SIP) Software.
      Step 5   In the Latest Releases folder, choose 10.3(1).
      Step 6   For phones that are running Firmware Release 9.3(3), perform the following steps.
      1. Select the file cmterm-8831-sip.9-3-3-TO-10-3-1-v2.cop.sgn, click the Download Now or Add to cart button, and follow the prompts.
        Note   

        If you added the firmware file to the cart, click the Download Cart link when you are ready to download the file.

      2. Click the + next to the firmware file name in the Download Cart section to access additional information about this file. The hyperlink for the readme file is in the Additional Information section, which contains installation instructions for the corresponding firmware:

        cmterm-8831-sip.9-3-3-TO-10-3-1-v2-readme.html

      3. Follow the instructions in the readme file to install the firmware.

      From these release notes;

      http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8831/firmware/10_3_1/english/release_note/CS38_BK_CF3CC967_00_cisco-unified-ip-conference-phone/CS38_BK_CF3CC967_00_cisco-unified-ip-conference-phone_chapter_00.html#CS38_TP_I38B1C80_00

      Here's the link to the Readme referenced above;

      http://www.cisco.com/web/software/282074288/118220/cmterm-8831-sip.9-3-3-TO-10-3-1-v2-readme.html

      Cheers!

      Rob

      Hi Rob,

      I am able to upgrade the firmware now. 

      Thanks

      Getting Started

      Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: