04-09-2017 03:17 PM - edited 03-17-2019 10:02 AM
Hi all,
I received the Below using edelivery which have to be deployed in Cisco BE6000S (BE6S-FXO-M2-K9):
My questions:
1- Are all/some licenses came installed in the BE6K-S router when purchased or i have to install them using PAK in CUCM & Unity.?
2- As it is BE6KS which has fixed application, how to use the below Telepresence VCS-Expressway licenses? OR will be installed in other server?
3- refer to attached plz,what is the mean of unfulfilled, do these need to be installed in the CUCM??
4- need configuration guide for VCS & Jabber in CUCM BE6K-S.
5- is the quick start guide for BE6000S & installation guide sufficient for first step to deploy or you have other advised resources?
thanks in advance
Product ID (SKU) |
Description |
Qty |
Carton/Cust Ref Line Note |
|
R-CBE6K-K9 |
Cisco Business Edition 6000-Electronic SW Delivery-Top Level |
1 |
||
BE6K-UCL-VM |
Cisco Business Edition 6000- Voicemail/Unified Messaging Lic |
45 |
||
BE6K-UCL-ENH |
Cisco Business Edition 6000 - Enhanced User Connect License |
45 |
||
BE6S-SW-11.5 |
Business Edition 6000S v11.5 export restricted software |
1 |
||
CUCILYNC-CLNT-UWL |
Cisco Unified Comm Integration for Lync for CUWL only |
1 |
||
IPC8-CLIENT-UWL |
IP Communicator 8.x for CUWL only |
1 |
||
JAB-IPH-CLNT-UWL |
Jabber for iPhone CUWL Only |
1 |
||
JAB-ADR-CLNT-UWL |
Jabber for Android CUWL Only |
1 |
||
JABBER-DESKTOP |
Jabber for Desktop for PC and Mac |
1 |
||
JABBER-TABLET |
Jabber for iPad and Android Tablet |
1 |
||
CIPC-UWL-RTU |
CIPC UWL Right to Use Certificate |
1 |
||
CUCILYNC-UWL-RTU |
CUCILYNC UWL Right to Use Certificate |
1 |
||
JAB-ADR-RTU |
Jabber for Android Right to Use |
1 |
||
JAB-IPH-RTU |
Jabber for iPhone Right to Use |
1 |
||
LIC-EXP-GW |
Enable GW Feature (H323-SIP) |
4 |
||
LIC-EXP-E |
Enable Expressway-E Feature Set |
2 |
||
SW-EXP-8.X-K9 |
Software Image for Expressway with Encryption, Version X8 |
1 |
||
BE6K-PAK |
Cisco Business Edition 6000 - PAK - Single Fulfillment |
1 |
||
LIC-EXP-SERIES |
Enable Expressway Series Feature Set |
4 |
||
EXPWY-VE-C-K9 |
Cisco Expressway-C Server, Virtual Edition |
2 |
||
LIC-EXP-TURN |
Enable TURN Relay Option |
2 |
||
LIC-EXP-AN |
Enable Advanced Networking Option |
2 |
||
LIC-SW-EXP-K9 |
License Key Software Encrypted |
4 |
||
EXPWY-VE-E-K9 |
Cisco Expressway-E Server, Virtual Edition |
2 |
||
BE6K-UXL-START |
BE6K Starter Pack - Single Fulfillment Enforcement |
1 |
||
LIC-EXP-E-PAK |
Expressway Series, Expressway-E PAK |
1 |
||
JAB-GUEST-RTU-K9 |
Jabber Guest Right to Use |
1 |
||
JABBER-TABLET-RTU |
Jabber for Tablet Right to Use |
1 |
||
JABBER-DSK-K9-RTU |
Jabber for Desktop Right to Use |
1 |
||
BE6K-START-UCL35 |
BE 6000 - UCL Starter Bundle with 35 Enh and 35 VM Licenses |
1 |
||
JABBER-GUEST |
Jabber Guest Session |
5 |
||
UCXN-11X-SCPORTS |
BE6K - Unity Connection 11x - VM Speech Connect Ports |
2 |
||
UCM-11X-ENH-UCL |
BE6K UCM 11X Enhanced User Connect Lic - Single Fulfillment |
45 |
||
UCN-11X-VM-UCL |
BE6000 Unity Connection 11x Basic Voicemail License |
45 |
||
LIC-EXP-DSK |
Expressway Desktop Endpoint License |
80 |
||
BE-11X-UCL-STR |
BE6000 v11 UCL Starter licenses |
1 |
04-09-2017 05:51 PM
1 Licensing AFAIK is the same, you'll need to use PLM, as with any other deployment
2 The set of applications on the BE6KS is fixed, you cannot change or swap the applications, if you want some other app(s) you need a separate server for them.
4 Same configuration guides apply to any deployment, there are no special config guides for the apps on a 6KS, review the VCS and Jabber docs on cisco.com for the config.
04-10-2017 06:39 AM
Thanks too for you Mr. Jaime,
but i didn`t understand answer for number 1, meaning for below.
1 Licensing AFAIK is the same, you'll need to use PLM,
Can you explain more,plz
04-10-2017 07:30 AM
Hi Mohammed,
PLM is Prime License Manager which comes inbuilt on the CUCM v 11.5 or you could install it separately. This PLM manages the CUCM licenses. You cannot install licenses on the CUCM directly and has to upload the licenses in PLM.
HTH
Rajan
04-10-2017 12:02 AM
1- Are all/some licenses came installed in the BE6K-S router when purchased or i have to install them using PAK in CUCM & Unity.?
2- As it is BE6KS which has fixed application, how to use the below Telepresence VCS-Expressway licenses? OR will be installed in other server?
Table 2. Co-resident Collaboration Applications on Cisco Business Edition 6000
3- refer to attached plz,what is the mean of unfulfilled, do these need to be installed in the CUCM??
4- need configuration guide for VCS & Jabber in CUCM BE6K-S.r
Search for configuration guide as per Expressway Version you are installing, doesn't vary based on Hardware.
5- is the quick start guide for BE6000S & installation guide sufficient for first step to deploy or you have other advised resources?
You might need to look at other resources for CUCM,CUC, Expressway Installations.
04-10-2017 06:36 AM
Hi Haris,
Thanks a lot for your detailed answers.
I think Question 2, the customer purchased the wrong server which is S (router based) in which the Expressway can only be installed high or medium density.
04-10-2017 07:46 AM
You cannot install on the same server as you have got a BE6S, You have to install it on any other supported servers on the list or have to procure any UCS servers.
Please check the below link for more information on the compatible servers for expressway:
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-cisco-expressway.html
HTH
Rajan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide