I have a Cisco IP communicator installed on my latop & PC, which is running a windows-7 Professional 32 bit operating system, .
When you start IP Communicator it come up with date and time displayed only no extension number ? Have you guys comeacross something like this before ?
>CUCM VERSION: 220.127.116.11047-1
>CIPC version : 18.104.22.168 and 22.214.171.124
>CDP DRIVER VERSION:1.0(0.2)Built
Voice Engine Version : 126.96.36.199
I have logged TAC with Cisco and so far no light, Cisco TAC number: 621445099
On CUCM phone is registered and it is not displaying anything except time and date. DN is configured for IPC but it is not displaying it which is the problem I'm facing here...
Based on that description I would think SCCP traffic is blocked or lost from CUCM to the laptop.
if this helps, please rate
Actually is not registering issues as IP Communicator do register when checking in CUCM but is not displaying DN except time and date ?
Looks like the issue will be resolved on CUCM 9.0…
Create/ add the Device on the call manager using SIP protocol it will work.
This is what I did to get the clients up running.
Please let me know if you require more information.
Thank you for the reply. The migration of the CIPC SCCP to SIP is working.
We will use SIP on our CIPC for now.