05-05-2016 02:23 AM - edited 03-17-2019 06:49 AM
Hi,
I need to integrate 8845 video phone to 10.5.2.11900-3 as I can't see it under device
I'm planning to do a Device Pack update using cmterm-devicepack10.5.2.13050-1.cop.sgn
I would like to avoid a SU at this stage
Anyone had done it?
Any advice?
Thank you
Solved! Go to Solution.
05-05-2016 02:28 AM
Hi Louis,
I don't see the device pack 10.5.2.13050-1 on cisco.com but even the device pack 10.5(2)(13049-1 has support for 8845 as shown in the read me file below
http://www.cisco.com/web/software/282074299/130594/cmterm-devicepack10.5.2_13049-1_Release_Notes.pdf
So, you can install any of the latest device pack on all nodes and reboot the cluster and you will be able to add 8845 IP phone.
Manish
05-05-2016 02:28 AM
Hi Louis,
I don't see the device pack 10.5.2.13050-1 on cisco.com but even the device pack 10.5(2)(13049-1 has support for 8845 as shown in the read me file below
http://www.cisco.com/web/software/282074299/130594/cmterm-devicepack10.5.2_13049-1_Release_Notes.pdf
So, you can install any of the latest device pack on all nodes and reboot the cluster and you will be able to add 8845 IP phone.
Manish
05-05-2016 02:43 AM
As Manish correctly mentioned, apply the latest DP and you should be good then
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix_chapter_00.html#CMDP_RF_C2DC6BBD_00
Regards
Deepak
05-16-2016 05:38 AM
Hi Deepak,
Instead of installed Dp why not just install
Description: 8845 and 8865 SIP IP Phone firmware files only - Compatible CUCM Versions: 8.5(1)+
Release: 11.0(1)
Release Date: 24/Nov/2015
File Name: cmterm-8845_65-sip.11-0-1-11.k3.cop.sgn
Size: 64.68 MB (67825963 bytes)
MD5 Checksum: 4bccf1c913d4b7e2cca6c01ebf02a09d
SHA512 Checksum:
659cbf684c81299dda259e6607b0138bb077bddc09b61a9d6c383b7ec6e037c55d003dade5c5af4ade44379ae2f94f29ed93eb27e9b5d40c0c2be2254253cd22
thanks
05-16-2016 05:47 AM
Hi Louis,
If the device is not listed in the dropdown menu on cucm you need the device package to enable that option, simply installing the firmware file does not work.
Manish
05-16-2016 06:18 AM
http://docwiki.cisco.com/wiki/CUCM_FAQ#Adding_support_for_new_endpoints
Regards
Deepak
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide