Cisco IP phone 8845 integration with cucm 10.5.2.11900-3

[Louis-Philippe Descamps]

Hi,

I need to integrate 8845 video phone to 10.5.2.11900-3 as I can't see it under device

I'm planning to do a Device Pack update using cmterm-devicepack10.5.2.13050-1.cop.sgn
I would like to avoid a SU at this stage

Anyone had done it?
Any advice?

Thank you

[Manish Gogna · Accepted solution]

Hi Louis,

I don't see the device pack 10.5.2.13050-1 on cisco.com but even the device pack 10.5(2)(13049-1 has support for 8845 as shown in the read me file below

http://www.cisco.com/web/software/282074299/130594/cmterm-devicepack10.5.2_13049-1_Release_Notes.pdf

So, you can install any of the latest device pack on all nodes and reboot the cluster and you will be able to add 8845 IP phone.

Manish

[Deepak Rawat]

As Manish correctly mentioned, apply the latest DP and you should be good then

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix_chapter_00.html#CMDP_RF_C2DC6BBD_00

Regards

Deepak

[Louis-Philippe Descamps]

Hi Deepak,

Instead of installed Dp why not just install

Description:    8845 and 8865 SIP IP Phone firmware files only - Compatible CUCM Versions: 8.5(1)+
Release:    11.0(1)
Release Date:    24/Nov/2015
File Name:    cmterm-8845_65-sip.11-0-1-11.k3.cop.sgn
Size:    64.68 MB (67825963 bytes)
MD5 Checksum:    4bccf1c913d4b7e2cca6c01ebf02a09d
SHA512 Checksum:    
659cbf684c81299dda259e6607b0138bb077bddc09b61a9d6c383b7ec6e037c55d003dade5c5af4ade44379ae2f94f29ed93eb27e9b5d40c0c2be2254253cd22

thanks

[Manish Gogna]

Hi Louis,

If the device is not listed in the dropdown menu on cucm you need the device package to enable that option, simply installing the firmware file does not work.

Manish

[Deepak Rawat]

http://docwiki.cisco.com/wiki/CUCM_FAQ#Adding_support_for_new_endpoints

Regards

Deepak