Cisco SPA122 ATA with CUCM version 12

[passakorn.m]

is the Cisco SPA122 supported on CUCM version 11 or 12 ? 

or any 3party ATA supported on CUCM ?

[Vaijanath Sonvane · Accepted solution]

Hi,

You can configure Cisco SPA122 or any third party SIP device as a "Third-Party SIP Device (Basic)" or "Third-Party SIP Device (Advanced)". Here is the URL for configuring Cisco SPA112 with CUCM. The steps are same for configuring Cisco SPA122 or any third party SIP device.

https://community.cisco.com/legacyfs/online/legacy/1/1/5/79511-spa112withCucm_04052013.pdf