03-31-2011 03:41 PM - edited 03-16-2019 04:16 AM
Hi all, I have a C881 with 4 FXS analog phones in a remote site, and a CME in the central site, calls between sites are working fine using H323, but I'm wondering if it is possible to transfer a call from one FXS phone to another FXS phone, with phones that are connected to the C881.
I was configuring timing hookflash-in X Y without results.
If is possible, please share the information.
Thanks a lot
David
Solved! Go to Solution.
04-01-2011 06:48 AM
Yes it is possible. Configure the ports in SCCP mode and register them to the CME.
04-01-2011 06:48 AM
Yes it is possible. Configure the ports in SCCP mode and register them to the CME.
04-01-2011 03:19 PM
Hi Paolo, thanks a lot, it works great.
Is it possible to activate SRST for this analog phones.
Thanks again
David
04-01-2011 11:36 PM
No, if you loose the link, and the ports are in SCCP mode, they will be unable to call each other.
12-15-2011 01:34 PM
I have a simple question, the 881SRTS router can be register with a CUCM 7 and work has a remote gateway (SCCP,MGCP or H323) with FXO lines ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide