I have a CME configured in 4331 router and the cme version is 10.5. To enable GUI, i couldn't see the compatible IOS version for 4331 in the compatibility matrix on below link.
My IOS version is: isr4300-universalk9.03.16.02.S.155-3.S2-ext.SPA.
Please advise the correct IOS version for 4331 router to enable CME10.5 GUI .
I have the CME 10.5 GUI files. Cisco is recommends some IOS releases for CME GUI versions. For example CME10.5, the IOS version would be 15.4(3)M and 15.4(3)S.
I tried 15.4(3)M IOS in 2900 series router along with 10.5 GUI file and i am able to access GUI.
But for the 4331 router, i couldn't see such supported IOS versions.
Many IOS releases are available for 10.5 CME .Do i need to install any specific IOS release which supports CME10.5 GUI ?.
You can check feature navigation with CME 10.5 what IOS version supported with. as CME is packaged with the IOS images.
Filter with CME 10.5 look for ISR4431 IOS feature and supported version too.
PS: Please rate all useful post.
As per the doc:
For all the IOS above 15.4(3)M and below 15.6(1)T, GUI version 10.5.0.0 will be supported. Starting 15.6(1)T. GUI version 126.96.36.199 will be supported.
So, you can use GUI 10.5.0.0 with your current version and should be able to access the GUI.
Hope this helps!
***Please rate helpful posts***
Thank you for the response, but REAMDE.TXT file says this file bundle is for CME 11.7.
I have downloded this before posting my query here and checked in 12.2 as well and it is saying the same thing in readme.txt that it is for CME 11.7.
I have also upgraded these files on CME router and webpage is not loading at all