cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
8654
Views
10
Helpful
25
Replies

CME 9.0 Upgrade Registration Rejected Max Phones Exceeded

jeremy.hudgeons
Beginner
Beginner

Recently upgrade to CME 9.0 and after ios and phone firmware upgrade I received the error Reg Rej - Max Phones... The CME was operational prior to the upgrade, Show license all showed the license active and the EULA accepted, Telephony-service had existing max-ephones configured. Entered the max-ephone command again with same information and I was prompted for the EULA to accept and phones began to register. Just wanted to put this out there for anybody else that comes across this problem.

25 REPLIES 25

I am so sorry ? I now out side the office ??? but if you can we do it tomorrow ? I am so sorry again and apologize ??

Many Thanks

Rashid

Hi Aman ,

Kindly could you remote my PC ??

Teamviewer info is :

ID:

301 549 058

Password :

5400

Hi Rashid,

can u try booting the router with old IOS and check if the error is still coming or not ?

use commadn boot system flash:c2900-universalk9-mz.SPA.151-4.m3[check the name]

share output of show license detail cme-srst

regds,

aman

Hi Rashid,

any updates if your problem is resolved or pending.

regds,

aman

Hi Aman,

its still??? and I do not know what i do now??!!

Thanks

Rasheed

Hi Aman,

how are you? this is the Sharing of output of show license detail cme-srst as the following :

show license detail cme-srst

Feature: cme-srst                        Period left: 8  weeks 3  days

Index: 1        Feature: cme-srst                          Version: 1.0

        License Type: EvalRightToUse

        License State: Active, Not in Use, EULA accepted

            Evaluation total period: 8  weeks 4  days

            Evaluation period left: 8  weeks 3  days

            Period used: 17 hours 1  minute

        License Count: 0/0  (In-use/Violation)

        License Priority: High

        Store Index: 7

        Store Name: Built-In License Storage

Hi Rashid,

Did u try booting the router with OLD IOS and then, check for show license detail cme-srst?

regds,

aman

Hi Aman

yes i do it ?? but Problem is still ??!!  and i try new version which is

c2900-universalk9-mz.SPA.154-1.T.bin  and it is the same !!??

Thanks

Rashid

Hi Rashid,

I have sent you the Private message.

regds,

aman

guihua xu
Beginner
Beginner

Have you ever solved the problem? I have the same problem when I upgrade the CME from 7.1 to 8.6.

the version 7.1 don't support 6921.but when I upload the IOS&CME firmware,and reload.It appeared that

registration rejected max phones exceed....anyone can help me ?Thank you.

guihua xu
Beginner
Beginner

Have you ever solved the problem? I have the same problem when I upgrade the CME from 7.1 to 8.6.

the version 7.1 don't support 6921.but when I upload the IOS&CME firmware,and reload.It appeared that

registration rejected max phones exceed....anyone can help me ?Thank you.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: