04-03-2012 06:57 AM - edited 03-16-2019 10:27 AM
Recently upgrade to CME 9.0 and after ios and phone firmware upgrade I received the error Reg Rej - Max Phones... The CME was operational prior to the upgrade, Show license all showed the license active and the EULA accepted, Telephony-service had existing max-ephones configured. Entered the max-ephone command again with same information and I was prompted for the EULA to accept and phones began to register. Just wanted to put this out there for anybody else that comes across this problem.
01-18-2014 03:38 AM
I am so sorry ? I now out side the office ??? but if you can we do it tomorrow ? I am so sorry again and apologize ??
Many Thanks
Rashid
01-18-2014 09:46 PM
Hi Aman ,
Kindly could you remote my PC ??
Teamviewer info is :
ID:
301 549 058
Password :
5400
01-19-2014 01:41 AM
Hi Rashid,
can u try booting the router with old IOS and check if the error is still coming or not ?
use commadn boot system flash:c2900-universalk9-mz.SPA.151-4.m3[check the name]
share output of show license detail cme-srst
regds,
aman
01-20-2014 09:38 PM
Hi Rashid,
any updates if your problem is resolved or pending.
regds,
aman
01-21-2014 09:30 PM
Hi Aman,
its still??? and I do not know what i do now??!!
Thanks
Rasheed
01-21-2014 11:08 PM
Hi Aman,
how are you? this is the Sharing of output of show license detail cme-srst as the following :
show license detail cme-srst
Feature: cme-srst Period left: 8 weeks 3 days
Index: 1 Feature: cme-srst Version: 1.0
License Type: EvalRightToUse
License State: Active, Not in Use, EULA accepted
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 3 days
Period used: 17 hours 1 minute
License Count: 0/0 (In-use/Violation)
License Priority: High
Store Index: 7
Store Name: Built-In License Storage
01-22-2014 12:43 AM
Hi Rashid,
Did u try booting the router with OLD IOS and then, check for show license detail cme-srst?
regds,
aman
01-22-2014 01:45 AM
Hi Aman
yes i do it ?? but Problem is still ??!! and i try new version which is
c2900-universalk9-mz.SPA.154-1.T.bin and it is the same !!??
Thanks
Rashid
01-22-2014 04:24 AM
Hi Rashid,
I have sent you the Private message.
regds,
aman
04-27-2014 08:07 PM
Have you ever solved the problem? I have the same problem when I upgrade the CME from 7.1 to 8.6.
the version 7.1 don't support 6921.but when I upload the IOS&CME firmware,and reload.It appeared that
registration rejected max phones exceed....anyone can help me ?Thank you.
04-27-2014 08:07 PM
Have you ever solved the problem? I have the same problem when I upgrade the CME from 7.1 to 8.6.
the version 7.1 don't support 6921.but when I upload the IOS&CME firmware,and reload.It appeared that
registration rejected max phones exceed....anyone can help me ?Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide