03-18-2010 02:37 AM - edited 03-15-2019 09:50 PM
hi,all:
in china mobile, when a calling party calls a mobile phone,when mobile phone is busy,mobile phone can hear slow beep and see the calling party'number,while calling party hears the prompt:sorry the subscriber you dail is busy now,please call it later.
in these call waiting:calling party can know called party is busy,and called party can see the calling party'number.
how can CME call waiting support this function?
03-18-2010 02:55 AM
Hi
Do you mean that when you dial a mobile from your CME, that this scenario does not work?
Or do you mean that you want to have the same functionality on your IP phones?
Thanks
Aaron
03-18-2010 06:24 PM
hi,
I mean that I want to have the same functionality on IP phones.
now called party can see the calling party'number,but when called party is busy and ignore the second call,second calling party can't know weathter called party is busy or not,or not on seat!!
thks
03-18-2010 08:48 PM
03-18-2010 08:51 PM
In china mobile,when call waiting,best practice hear by calling party:
Hear two sentence:
sorry,pls hold on, the subscriber you dail is busy now sorry,pls hold on, the subscriber you dail is busy now
then hear:ring tone,ring tone, ring tone, ring tone......
if called party refuse, Hear sentence:
the subscriber you dail is busy now
the subscriber you dail is busy now
my customers want acquire this best practice function in there cisco ip phone!
03-19-2010 01:22 AM
Hi
On an IP phone, the call waiting doesn't work like this.
If you configure your ephone-dns as dual-line, you can see a second call arriving on your line, and can switch between them.
I'm not aware of any standard way to make the system return a voice prompt instead of busy tone.
The only way I can imagine this being done is via tcl scripting, however that's not a simple task and may not actually be possible.
Regards
Aaron
Please rate helpful posts..
03-19-2010 04:07 AM
It is possible, and I wrote it some time ago already.
http://www.ciscoxmlservices.com/en/tcl--ivr-scripts
It is a common request because many PBX have diffrent ringback tones for busy subscribers, and managers often want a positive indication of other's phones status.
03-19-2010 04:59 AM
Hi
Good stuff - what's the deal with downloads from your site? Are your scripts not available freely anymore?
Thanks
Aaron
03-19-2010 05:10 AM
Not anymore due to excessive leeching.
I will introduce an immediate purchase option soon, but for now must contact via email.
03-19-2010 06:34 PM
hehe,no money no talk
I konw cisco's PHL PDI team can develop the TCL scripts,it is free for partner.
if i get it,i will upload here.
03-20-2010 05:02 AM
Sure, let us know
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide