Hello, We are currently using a Be6000 system and when we schedule a call forwarding on our phones (model 7945) to external numbers, it works perfectly when the original call comes from an internal position, but when it is an external call then this ...
I have had a PAP2 for a while and have never found any way to backup the configuration apart from noting down each and every parameter in a handwritten document. I have now newly acquired an SPA3102 which also appears to have no function that allows ...
Is it possible to create users in CUCM that can manage only specific route patterns? If I have a company with decentralized management teams, how can these teams manage their own route patterns if there is only one CUCM cluster?Best Regards.Carlos Fu...
Hi All,I am able to get the mid call DTMF features from mobile phones for SNR calls only when the call is originated from the mobile. By the features I mean hold, resume, conference and call park etc which are invoked by sending the appropriate combi...
HelloCould be possible to integrate CME with a Presence server???....if the answer is not, what are the reasons????Thanks in advanced for the help.Regards,
Hi Team,I have a problem with location for IP Communicator, I have verion 7.1.3.3000 and I download the Locale 7.1.3.2000 (The most recent for 7.1). And this not work.Can you help meThanks
Recently my org upgraded from ccm 4.0(2) to 4.1(2)We are looking to cut costs, and one idea that has come up is to migrate our fax machines from normal PSTN lines to a Cisco VOIP Phone adapter or something like that.What experience has everyone had w...
I use Openvox A800P with 5 FXO and 2 spa8000. Sometimes i heared some noise in different telefones. But anoter time they works correctly. How to remove this noise?There are Gateway settings and logs in the attachment.
Hi all, we have problem with time on 7941G-GE firmware SCCP41.8-2-1S on CCME ver. 4.0(2)What we performed:1. set the time-zone in telephony-service2. set the correct type 7941GE for ephone3. no create cnf4. create cnf5. restart of phones6. restart of...
Hi: Im planning to upgrade CUCM from 4.1.3(sr6) to 7.0.2 and I ran the DMA form CUCM 4.1.3 but the Export is failed, I saw the "DMAErrors" Log and it show me this:********************************************************************************** ...
We have 2 users that are sharing an extension on 7942 dual line phones. The secretary always answers the phone and then transfers the call to the boss but is goes straight to voicemail. We have setup an expansion line to receive the transfer but i...
I have deleted all unassigned DN and recreated a phone thinking its database issue but no luck.Everytime I call just one number, the same call goes out and comes in the gateway causing issues.Any suggestion what to look for?dial-peer voice 2000 voip ...
Hi Folks, This is the second time that I run into this issue. A weeks back a customer called me at explained that they have a fxs card with 4 ports with 4 analogs phones connected to them.However, they cannot make simultanous calls(two ...
Dear AllWe have a voice gateway connected via 1 E1 (TDM) with the 20 channel DoD and 10 DiD. We will replace it with SIP triunk (IP based Network) and the customer require the same configuration (20DoD+10 DiD) Is it possible to do that with SIP Trun...
I have an H323 voice gateway and not all calls but some calls get dropped and no audio when it reaches its destination. It does have MTP checked and required and is using a G729 codec for fast start.Other than requiring MTP and transcoders from G729...
Question -1Is there any way in CCM 6.X for make subscriber as publisher, without re-install it from start ???Question - 2I changed the hostname of CUCM 6.1 from GUI, after restart i m not able to login into system ... for make it working i tried to r...
