cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Walkthrough Wednesdays
3216
Views
0
Helpful
3
Replies
gohlex8848
Beginner

CME time-zone no UTC/GMT +13?

Hi Guys,

Hope I can seek a little help here. When I tried to configured the time-zone for country Tonga in the CME Telephony-service, I can't seem to have the selection of GMT+13 (equivalent to offset +780 min), the most is +12. Other than adjusting the router clock to advance 1hr than the actual time, is there any other solution to overcome this? The CME version is 7.1

I notice the router time-zone and CUE time-zone both have the selection for correct time-zone, except the CME

Router(config-telephony)#time-zone ?
  <1-53>  select timezone name used by IP phones (offset in minutes)
1 Dateline Standard Time -720
2 Samoa Standard Time -660
3 Hawaiian Standard Time -600
4 Alaskan Standard/Daylight Time -540
5 Pacific Standard/Daylight Time -480
6 Mountain Standard/Daylight Time -420
7 US Mountain Standard Time -420
8 Central Standard/Daylight Time -360
9 Mexico Standard/Daylight Time -360
10 Canada Central Standard Time -360
11 SA Pacific Standard Time -300
12 Eastern Standard/Daylight Time -300
13 US Eastern Standard Time -300
14 Atlantic Standard/Daylight Time -240
15 SA Western Standard Time -240
16 Newfoundland Standard/Daylight Time -210
17 E. South America Standard/Daylight Time -180
18 SA Eastern Standard Time -180
19 Mid-Atlantic Standard/Daylight Time -120
20 Azores Standard/Daylight Time -60
21 GMT Standard/Daylight Time +0
22 Greenwich Standard Time +0         --More--
23 W. Europe Standard/Daylight Time +60
24 GTB Standard/Daylight Time +60
25 Egypt Standard/Daylight Time +60
26 E. Europe Standard/Daylight Time +60
27 Romance Standard/Daylight Time +120
28 Central Europe Standard/Daylight Time +120
29 South Africa Standard Time +120
30 Jerusalem Standard/Daylight Time +120
31 Saudi Arabia Standard Time +180
32 Russian Standard/Daylight Time +180
33 Iran Standard/Daylight Time +210
34 Caucasus Standard/Daylight Time +240
35 Arabian Standard Time +240
36 Afghanistan Standard Time +270
37 West Asia Standard Time +300
38 Ekaterinburg Standard Time +300
39 India Standard Time +330
40 Central Asia Standard Time +360
41 SE Asia Standard Time +420
42 China Standard/Daylight Time +480
43 Taipei Standard Time +480
44 Tokyo Standard Time +540
45 Cen. Australia Standard/Daylight Time +570 
46 AUS Central Standard Time +570
47 E. Australia Standard Time +600
48 AUS Eastern Standard/Daylight Time +600
49 West Pacific Standard Time +600
50 Tasmania Standard/Daylight Time +600
51 Central Pacific Standard Time +660
52 Fiji Standard Time +720
53 New Zealand Standard/Daylight Time +720

Regards,

Alex

3 REPLIES 3
paolo bevilacqua
Hall of Fame Master

Sorry, no other solution.

I understand and agree that is kind of disrespectul for Cisco to forget about a Nation no matter its size and remoteness.

worst case he could set the time to current time and use GMT+0, but of course that wouldn't work with NTP.

wow, that's annoying i bet!

I have the sable problem

I have Cisco Unified Communications Manager Express Version 7.0(1)

The  ip phone 7911, 7931, 7960, 7961  display wrong time

I want to fixe time to (UTC/GMT + 1) time

I don't have NTP server

Please help

Content for Community-Ad

Spotlight Awards 2021