09-10-2012 07:37 AM - edited 03-16-2019 01:07 PM
Hello everyone,
Comcast is requiring the use of an RJ48C Crossover cable to connect to their PRI handoff. Has anyone seen any issues with using a standard PRI WIC card with that type of cable and service?
Thanks in advance! All replies rated.
Solved! Go to Solution.
09-10-2012 07:54 AM
RJ48 is a standard PRI cable, if they require corssover you cannot use Ethernet cross over as different pairs are crosses, basically you need 1-4, 2-5 pin outs.
HTH,
Chris
09-10-2012 07:54 AM
RJ48 is a standard PRI cable, if they require corssover you cannot use Ethernet cross over as different pairs are crosses, basically you need 1-4, 2-5 pin outs.
HTH,
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide