08-21-2009 06:31 AM - edited 03-15-2019 07:27 PM
Hi,
Recently we have discovered that conferncing of an external number keeps dropping that particular call. Conferencing internally is fine however the external calls keeps getting disconnected.
It is an h323 gateway. If you want I can send the sh run configs.
Any ideas?
Solved! Go to Solution.
08-21-2009 07:06 AM
add the voice class codec on the voip dial peers
HTH
java
if this helps, please rate
08-21-2009 06:39 AM
Probably codec issues, if you're using SW CFB it only handles G711.
H323 by default uses G729 unless configured to do otherwise.
HTH
java
if this helps, please rate
08-21-2009 07:00 AM
Can you guide me as to what has to done on the h323 gateway?
I created a voice class as follows:
voice class codec 2
codec preference 1 g711ulaw
codec preference 2 g729r8
codec preference 3 g729br8
What next ?
08-21-2009 07:06 AM
add the voice class codec on the voip dial peers
HTH
java
if this helps, please rate
08-21-2009 07:57 AM
I already added it to the voip dial peer that I have see below:
7000 for auto-attendant
172.21.0.2- Call Manager
dial-peer voice 9990 voip
destination-pattern 7000
voice-class codec 2
session target ipv4:172.21.0.2
dtmf-relay h245-alphanumeric
no vad
Am I missing another voip dial-peer?
08-21-2009 09:41 AM
I have no idea of your dial plan or call flow, so...
HTH
java
if this helps, please rate
09-09-2009 03:58 AM
hi,
Did u find out what the problem is ?
Am facing the same problem...Can you pls explain me what you did to fix this pls.
shiv
09-10-2009 05:02 PM
just an input fellow trini :). are the calls being disconnected immedaitely or are they proceeding and then dropping after a while...if its the latter then it may not be codec but as Jaime was indicating we will need a little more to go on to find the exact cause of the issue. Of course dont post anything ip addressing etc that you think would be a security issue
09-10-2009 09:55 PM
Thanks for your reply..
Its a Codec problem and the issue has been resolved :)
many thanks
shiv
10-14-2017 12:32 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide