02-14-2015 07:57 AM - edited 03-17-2019 01:58 AM
PSTN is SIP TRUNK from voip.ms
MRGL has SW_MRG, HW_MRG
SW_MRG: ANN, CFB, MOH, MTP
HW_MRG: XCODE, MTP
I read the software conference bridge supports only g711ulaw. My first test was using a remote phone that had a g729 stream, so I tried from a locally registered phone to two cell phones, and same thing. RTMT shows no "MediaListExhausted" warnings. I tried restarting the voice media streaming app.
On my CUBE i'm getting isdn cause code 16 (normal call clearing).
Solved! Go to Solution.
02-14-2015 09:30 AM
What is the region between the sip trunk and the phones set to. What codec is negotiated for the call? If you press the ? button on the phone what codec does it show. What is the region between your software cfb and your phones?
02-14-2015 09:30 AM
What is the region between the sip trunk and the phones set to. What codec is negotiated for the call? If you press the ? button on the phone what codec does it show. What is the region between your software cfb and your phones?
02-14-2015 02:50 PM
I fixed this by changing maximum bitrate between regions to 64kbps, which changed the call to g711, and allowed the sw conference bridge to work.
Checking the call leg on cube showed a g711ulaw call- but that was between cube and provider. Call was actually g729 and invoking a transcoder to g711 when going to provider.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide