09-23-2014 06:42 AM - edited 03-17-2019 12:15 AM
Hello
I add a new HDD to my server ( MCS 7825 i5) that already bought with one HDD. now the server has 2 HDD.
My Problem is when I try to configure RAID 1 on my server it seem like the the controller not install.
so I need to make sure if the controller is installed otherwise Is there are any procedure to configure RAID on my server.
thank you for your relpys
Best Regards
09-23-2014 07:06 AM
Are you able to access the LSI configuration? Please reference the guide below:
ftp://ftp.software.ibm.com/systems/support/system_x_pdf/ibm_doc_sraidbr_10i-0508_install-users-guide.pdf
HTH
Yosh
09-23-2014 09:06 AM
thank you for your reply it seem that not existe in the server I see with system ingeniere and he confirmed me that the card not existe in the server
thank you again for your reply
09-23-2014 09:08 AM
Gotcha!
Yosh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide