07-03-2013 08:33 AM - edited 03-16-2019 06:12 PM
I need help configuring my voice gateway 2851 FXO to forward fax to my ax server number, using CUCM 8.5.
- I have an analog line in my Canada office (FXO) and need all fax send to US fax server. -
Thanks,
Nigel Manhertz
07-03-2013 11:01 AM
Configure the FXO port with plar that points to an extension that redirects the call to CUCM via a dial-peer (assuming GW is integrated to CUCM via SIP/H323), then in CUCM make sure you have a matching route pattern that redirects this call to the fax server (assuming it is already integrated).
HTH,
Chris
07-05-2013 02:03 PM
Chris thanks for your response.
description:
The Fax server is not integrated into CUCM and the fax number is external to CUCM.
What I am trying to accomplish, is to have the FXO port form my remote office send to my corp fax server
voice-port 0/3/1
description << to fax >>
connecton plar opx ??? (does this ext have to be configured in CUCM)
dail-peer voice 10 pots
destination-pattern xxxxxxxxxx
port 0/3/1
the gateway I am using is configured in CUCM for my voice circuit (T1).
Thanks for any help,
Nigel M
07-06-2013 04:52 AM
Hi Nigel,
No need to have this extension configured but the route to that number should be available.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide