03-24-2019 12:53 AM
I have two extension line one Cisco IP phone, we need to assign different device pool to each extension. is that possible
so the phone shall have two device pool.
Solved! Go to Solution.
03-24-2019 11:20 PM
03-24-2019 02:07 AM
Hi,
The phone cannot have two device pool.
Why are you trying to have two device pool on same phone, what exactly is the goal.
Regards,
Adarsh Chauhan
Please mark helpful or Correct
03-24-2019 02:41 AM
because we have two different line on this phone each line belong to different location
03-24-2019 02:58 AM
03-24-2019 03:12 AM
"which you would like to be different for the two lines which is only available on Device or Devicepool" each line should have different route to make the call for Example :when making outgoing call :
each Voice gateway is listed in different devicePool as they located in different location.
03-24-2019 03:31 AM
What i can think is as following.
1) make a redundant dial plan in different parition all together and assign the CSS on the Line configuration.
2) do translation to reject the call on gateway on basis of calling number and failover it the other gateway. (I haven't tested this but i know that you can change the gateway reject reason code and make CUCM failover)
Regards,
Adarsh Chauhan
Please mark helpful or Correct
03-24-2019 11:20 PM
03-25-2019 12:39 AM
Thanks Haris,
yes , We are using the Local Route Group Option.
I'll try your recommendation and feed you back
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide