cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
5560
Views
19
Helpful
14
Replies
Highlighted
Contributor

Critical Error : CUCM 9.1.2 Installation failed with return-code 256

Hi all,

The installation aborted with the following error message, any ideas on why this could happen? How can I access the mentioned path? How can I get the dump logs?

criticalerror.PNG

14 REPLIES 14
Highlighted
Hall of Fame Cisco Employee

What HW are you using?

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate
Highlighted

Hi Jaime,

I'm using Vmware v8, but didn't deploy with .ova from cisco.

Regards,

Fikri

Highlighted
Hall of Fame Cisco Employee

Then, you should be using the OVA from Cisco, and that's not HW what you just replied.

I'll take it you're running ESXi 5 from the V8, but again, that does not answer the question, that's not HW.

HTH

java

if this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate
Highlighted

Hi Jaime,

Sorry for my answer, I find it hard to focus at these hours sometimes :(. I believe what you are asking is the general specs of the VM :

Highlighted

what server are you using? Is it ucs c220 or some third party server?

Highlighted

Hi I have also same issue.

 

i am runing ucs c200 M2 server .

Esxi 5.0

 

After taking a  two-three hours not able to install getting same issue.

d