CSIM START

[Sivanesan Rathinam]

Hi,

We have 5 ISDN interfcae and all the Dial-peer has .T which is mapped to all the five Interfaces.

We just want to check O/B call specific to one interface without any change in destination-pattern or Prefernece.

Is there any command to check in VG, Even i checked with CSIM START but i couldn't find any command to check for particular interface.

Please suggest.

SIVANESAN R       

[paolo bevilacqua]

You can try "show dialplan  number xxx timout". However, it doesn't work for all cases, and you will need to genererate real test calls.

[Sivanesan Rathinam]

Paolo - I just want to make O/B call from VG by using one particular interface, Is there any command to check.

SIVANESAN R

[paolo bevilacqua]

Answered above.

[Scott Leport]

Csim start and the number. E.g

Csim start xxxxxxx
Debug isdn q.931 (if using isdn)
Term mon

If you have multiple T1 / E1's and you want to test calls out of a particular trunk, create a specific test dial peer, something 56.t and specify the voice port you want the call to go out of.

E.g

Dial peer voice 5600 pots
Destination-pattern 56.t
Port 0/0/0:23

Or port 0/0/0:30 if using E1.

Sent from Cisco Technical Support iPhone App