06-09-2016 08:19 PM - edited 03-17-2019 07:11 AM
CUCM 11.5 is now available on CCO software downloads as of today, the FCS build number is 11.5.1.10000-6 and can be accessed at the following:
File: UCSInstall_UCOS_11.5.1.10000-6.sgn.iso
Release Notes
Imp Change:
As of Cisco Unified Communications Manager Firmware Release 11.5, the following phones are not supported:
Cisco IP Phone 12 SP+ and related models
Cisco IP Phone 30 VIP and related models
Cisco Unified IP Phone 7902
Cisco Unified IP Phone 7905
Cisco Unified IP Phone 7910
Cisco Unified IP Phone 7910SW
Cisco Unified IP Phone 7912
Cisco Unified Wireless IP Phone 7920
Cisco Unified IP Conference Station 7935
If you use any of these phone models on an older release of Cisco Unified Communications Manager and you upgrade to Release 11.5, the phone will not work after the upgrade completes.
Manish
06-22-2016 02:37 AM
I'm just downloading a ISR 44xx IOS image, and that's taking it's time too. I wonder if Cisco have been paying their CDN bill?
(Where do you report this kind of issue to?)
GTG
12-04-2016 07:09 AM
12-04-2016 07:14 AM
Hi Tom,
That is correct, these models which are deprecated can not be registered with CUCM 11.5. However, 7912 does support SIP so you may try adding it as a third part SIP device on cucm but it may not guarantee all the features that you would like to have as in a supported endpoint.
Manish
05-19-2017 08:47 AM
Hello Manish,
My UCM 9.1.2 sever has over 400 Cisco 7912 phones.
How can I do in order to upgrade? Does the CUCM 11 support the Cisco 7912?
05-19-2017 08:52 AM
Hi Claudio,
No, these phones won't work with CUCM 11.5 or higher.
Manish
05-19-2017 09:11 AM
Then I think that is definitely not supported, and not going to work, the documentation clearly explains that device model will no longer be supported on 11.5 so that I need to plan ahead of time and replace them.
05-19-2017 09:13 AM
I understand, but there is no point is upgrading to a 10.x or 11.0 version, you should talk to your local Cisco Account team to see what is the best option for you.
Manish
07-19-2017 11:54 AM
Thanks for the post !! btw, has anybody tested 7912 with SIP firmware in CUCM 11.5 ?
best !
07-19-2017 11:59 PM
Hi Vladimiro,
7912G can be added to CUCM 11.5 as a third party SIP device and it will work fine like any other third party SIP endpoints, this is the only way you can use those 7912's with CUCM 11.5 or higher. if you have a bunch of those then i would suggest registering a couple of them to carry out testing different features and services before doing the same with rest of the 7912's.
HTH
Manish
07-20-2017 06:35 PM
Thanks Manish !!
09-03-2017 03:12 PM
09-03-2017 03:16 PM
Anything that is not mentioned as a deprecated model in the RN, is still supported.
05-15-2018 10:33 AM
05-15-2018 10:40 AM
As explained in the thread, the RN for 11.5 and 12.0 outline which models have been deprecated in each release, anything NOT MENTIONED as deprecated, is still available in the drop-down.
No, there is no webpage that tells you what phone models are supported per CUCM release as that might change depending on the specific DevPack/SU you run.
05-15-2018 03:43 PM
Thank you for the information. We are on CM 10.5.1 with 1000 7942's and approximately 200 7975/7965's. Would you please let me know what the average life cycle of a Cisco VOIP phone is? Should we be looking to replace these every 5 or every 10 years? How many versions of Call Manager are released each year? How long do they normally support devices?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide