06-19-2010 07:22 PM - modifié 03-15-2019 11:18 PM
le 06-20-2010 07:41 AM
How about looking at, or attaching, the log files it shows on that page?
le 06-20-2010 04:48 PM
le 06-20-2010 06:50 PM
Mike,
Interestingly, all of the failures take place at the same point within each file (4096 bytes). What is the name of the SFTP server application you are using to backup files to?
Hailey
le 06-21-2010 07:32 AM
Hi David. The backup server is a Unix box and we use SSH to send the backups.
le 06-21-2010 12:03 PM
Is this server a PUB or a SUB, do you have the TFTP service activated on this node?
What about a restart to the DRF master and local services, a lot of temporary issues with DRF take care this way. The restart should not impact network operation as this two services take care exclusively for the backups.
le 06-21-2010 01:01 PM
Hi Robert, the server is the Pub (only server in cluster) and running TFTP. I'll restart DRF services, re-run backups and let you know the results. Thanks!
-Mike
le 06-24-2010 10:46 AM
Hi Robert,
I restarted the DRF services reran backups and issue is still happening. Below is the error at the bottom of one of the failed backup logs. On a related note I backup other clusters to the same SFTP server with no issues:
tar: -: Wrote only 4096 of 10240 bytes
tar: Error is not recoverable: exiting now
2010/06/25 00:37: sudo tar -cvpPf - /var/log/active/cm/report/rtmtreporter 2>> /common/drf/backup.log
2010/06/25 00:37: Backup failed.
-Mike
le 09-06-2010 09:12 PM
hello everyone,
i have the same problem with that version of cucm.
i have attach the TXT file with the errors on two services after begin the backup process and reports files on cucm.
Could you find the solution for this problem?
thanks for any help
le 09-07-2010 08:10 AM
Please check out Cisco BugID: CSCte62205
In short; backups fail when using an OpenSSH SFTP server with "client alive messages" enabled. To fix it, disable "client alive messages" on the OpenSSH server.
HTH
Matt
le 09-08-2010 08:07 PM
hi matthew,
thanks for your respond, that document of cisco explain all, i changed the sftp client for other of name "FreeFTPd".
thanks for help me.
Découvrez et enregistrez vos notes préférées. Revenez pour trouver les réponses d'experts, des guides étape par étape, des sujets récents et bien plus encore.
Êtes-vous nouveau ici? Commencez par ces conseils. Comment utiliser la communauté Guide pour les nouveaux membres