09-11-2012 07:04 AM - edited 03-16-2019 01:08 PM
Hello,
I have an stupid doubt but is a doubt!
Can i build a cluster with one CUCM on VMWARE, an another CUCM installed in a MCS? The same thing with CUC!
Regards
Leonardo Santana
Solved! Go to Solution.
09-11-2012 07:11 AM
09-11-2012 07:12 AM
Hi Leonardo,
Please refer the below thread.
https://supportforums.cisco.com/thread/2111251
Thanks,
Anand
09-11-2012 07:16 AM
Hi Leonardo,
Here we go
A: Yes, you can mix UCS servers with an existing MCS cluster.
From;
https://supportforums.cisco.com/docs/DOC-8973
Cheers!
Rob
"Why not help one another on the way" - Bob Marley
09-11-2012 07:11 AM
Yes as long as specs are the same.
HTH,
Chris
09-11-2012 07:12 AM
Hi Leonardo,
Please refer the below thread.
https://supportforums.cisco.com/thread/2111251
Thanks,
Anand
09-11-2012 07:16 AM
Hi Leonardo,
Here we go
A: Yes, you can mix UCS servers with an existing MCS cluster.
From;
https://supportforums.cisco.com/docs/DOC-8973
Cheers!
Rob
"Why not help one another on the way" - Bob Marley
09-11-2012 07:18 AM
Thanks everyone plus 5 for all!
Thanks again!
Regards
Leonardo Santana
09-11-2012 07:29 AM
Hi Leonardo,
You are most welcome my friend
Cheers!
Rob
"Why not help one another on the way" - Bob Marley
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide