cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5043
Views
20
Helpful
9
Replies

CUCM Mixed Mode

ShankarP
Level 1
Level 1

Hi experts, would like to check if there is any license requirement for moving CUCM 12.x cluster to mixed mode ? (enable encryption). Thanks

1 Accepted Solution

Accepted Solutions

Jaime Valencia
Cisco Employee
Cisco Employee

Your smart account needs to be able to generate a token with "Allow export-controlled functionality" in order to enable mixed mode.

HTH

java

if this helps, please rate

View solution in original post

9 Replies 9

Dennis Mink
VIP Alumni
VIP Alumni

as far as I know you dont need additional lics for that.  

 

make sure you have restricted software installed, otherwise you will be flogging a dead horse.

Please remember to rate useful posts, by clicking on the stars below.

Jaime Valencia
Cisco Employee
Cisco Employee

Your smart account needs to be able to generate a token with "Allow export-controlled functionality" in order to enable mixed mode.

HTH

java

if this helps, please rate

Shashank Mahajan
Cisco Employee
Cisco Employee

Hi Shankar,

This requires export controlled functionality in smart licensing.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/collab12/collab12/security.html#pgfId-1322088

 

To run CUCM 12.0 in Mixed Mode, it is necessary to successfully register the CUCM 12.0 with the "restricted" Registration Token from Smart Account. If you already have a Smart Account with Export functionality allowed, and you are running CUCM 12.0 in Mixed mode, make sure the token option checkbox for "Allow export-controlled functionality" is checked (which will generate a restricted Registration Token).

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/12_0_1/systemConfig/cucm_b_system-configuration-guide-1201/cucm_b_system-configuration-guide-1201_chapter_011.pdf#page=4

 

Hope this helps.

 

Regards,

Shashank

 

Hello Cisco Community,

 

Same Question but the version of CUCM is 10.5? do i need encryption license in running Mixed Mode? 

Cisco Unified Communications Manager, Release 10.5(2)SU6 requires an encryption license to run the product in mixed mode.Check Release Notes for Cisco Prime License Manager, Release 10.5(2)SU1a .

 

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.

Hi,
Thanks for the update. The release notes for PLM mentions that Cisco Unified Communications Manager, Release 10.5(2)SU6 requires an encryption license to run the product in mixed mode.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/plm/10_5_2_SU1/releasenotes/cplm_b_release-notes-1052su1/cplm_b_release-notes-cplm-1052su1_chapter_010.html

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.

Your TAC engineer is wrong, you DO need an encryption license on 10.5(2)SU6, see slide 114

https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2018/pdf/BRKUCC-2501.pdf

 

HTH

java

if this helps, please rate

Hi Jaime Valencia,

 

Thank you for confirming, yes your correct,  my TAC Engineer told that he overlooked it and saying sorry about what he said. 

 

Is the Encryption License free?

 

 

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: