05-08-2012 05:19 AM - edited 03-16-2019 11:02 AM
We recently procured the 819 platform with 15.1.4 IOS but now we can't get the CCME to work and actually there is little we can find on the Cisco.com portal that clearly states that the CCME is not supported so can anyone provide some clarity on this? CCME on 819 possible or not?
FYI: the SW release 15.1.4 does state that the IOS includes CCME version 8.6 but on the 819 there is no sign of a Voice file or command support.
05-08-2012 05:43 AM
Hi there,
Here's a couple of references that may help;
Q. Can voice support be added to a Cisco 890 Series data model?
Check out Tables;
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme86spc.htm.html
Cheers!
Rob
"Everything is broken" - Bob Dylan
05-08-2012 05:44 AM
This platform does not support CME.
Sent from Cisco Technical Support iPhone App
05-08-2012 05:46 AM
Hi,
I have looked through the CME compatability matrix
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/33matrix.htm
I do not see any support for CME on an 819
Also there is no mention on the 819 data sheet
http://www.cisco.com/en/US/prod/collateral/routers/ps10906/ps380/ps11615/data_sheet_c78-678459.html
The smallest router supported for CME is an 1861
HTH
Alex
Please rate useful posts
05-08-2012 05:52 AM
Actually there are some 880 models that support 5 user CME as well pots interfaces, check them out in data sheet.
05-08-2012 04:24 PM
I'm no voice tech guy but if by "CME" you mean load the software into the 819 router, then the answer is NO. The reason is because the 819 does not have enough flash memory capacity to load the software and associated phone loads.
If by "CME" you mean hardware, the answer is still no because the ISM/SM card cannot physically "fit" into the tiny frame.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide