09-05-2012 02:35 AM - edited 03-16-2019 01:02 PM
Dear All
I want to upgrade CUCM 6.0.1.3000-7 [ 6.0(1b)] to CUCM ver 8.6. now there is no direct upgrade to 8,6 from version 6.0.
Upgrade path is 6.0.1.3000-7 to 6.1.1.3000-2
6.1.1.3000-2 to 6.1.3.3000-1
6.1.3.3000-1 to 6.1.4.2190-3
and then 6.1.4.2190-3 to 8.6
Now I am about to upgrade first stage that is 6.0.1.3000-7 to 6.1.1.3000-2.
Kindly please can you help me step by step on how can I carry this 1st stage of upgrade.
your immediate reply is highly appericated.
Thanks you.
09-05-2012 04:10 AM
Abbas,
Release notes guide of the destination version would have the detailed upgrade procedure. For your 6.1.1, here you go http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/6_1_1/cucm-rel_note-611b.html#wp322228
GP.
Pls rate the post if it helps !!
09-05-2012 05:20 AM
There are also hardware considerations here. Are you doing the upgrade on existing 6.x servers or using new hardware to get to 8.6?
Hailey
09-05-2012 07:38 AM
HI David
Thanks for the reply.
I am doing upgrade on existing hardware. Can you please advice how i can upgrade from version 6.0.1.3000-7 to 6.1.1.3000-2 that is 6.0(1b) to 6.1(1b).
Thanks
09-05-2012 07:42 AM
Dear Gajana
Thanks for reply,
Attached document for Upgrade to 6.1(1b) says this upgrade from 6.0(1) or 6.0(1a).
What i have is version 6.0(1b) as my current version and from this version I want to upgrade to 6.1(1b). Document you send does not mention upgrade from 6.0(1b).
Kindly Advice.
09-05-2012 07:49 PM
Hi Abbas,
Please refer the table "Supported upgrade paths to/from table" in the below link for your current upgrade plan,
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf
For step by step procedure for specific version CUCM upgrade, refer the release notes of that version,
http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/prod_release_notes_list.html
Also verify if your current hardware supports the upgradable version from the below link,
Hope this helps.
Anand
pls rate helpful posts !!
09-05-2012 08:38 PM
Abbas,
Regardless of CUCM versions ( in minor upgrades ), the procedure remains same. Your case also is of minor upgrade hence procedure remains same only the upgrade file name will be changed. You will use the upgrade file downloaded from CCO & use the same upgrade procedure.
GP.
Pls rate the post if it helps !!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide