09-04-2013 04:09 AM - edited 03-16-2019 07:12 PM
Hi,
I have a h323 gateway with SRST enabled. All the ephones on gateway are added durung srst (i didn't add manually). Since, i have changed many phones and assigned to different users. Now during SRST, many user gets different cme extension due to exchange of many phones. Now i want to delete all ephones related information from gateway so that next time SRST occurs,it would download again all ephone information from CUCM.
Thanks.
09-04-2013 05:26 AM
SRST doesn't add ephone's and ephone-dn configuration.
You maght have CME in SRST fallback mode, and then there are several options.
I normally choose the one that acts as classic SRST, no adding of ephone's.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesrst.html
Bye,
JH
09-04-2013 09:40 PM
I never added epohnes in cme since i am using below commands.
telephony-service
srst mode auto-provision all
srst ephone template 1
srst dn template 1
srst dn line-mode dual
!
Question is how to delte the ephones and ephones-dn. Thanks
09-05-2013 01:56 AM
Hi.
Please post your entire vg config so we can look better at your issue
Regards
Carlo
Please rate all helpful posts
"The more you help the more you learn"
09-05-2013 02:36 AM
Just remove the ephone and ephone-dn
Like:
no ephone X
no ephone-dn X
Bye,
Jan
09-05-2013 07:28 AM
I have around 150 ephones. Cant delete one by one
09-05-2013 07:33 AM
When I have a config which is to messy, I take the whole configuration in notepad.
Remove what I don't want, then do a erase nvram, reboot and apply the configuration.
You might try no telephoney service, maybe this will remove the ephone's and then apply again telephony service
Bye,
Jan
10-11-2013 05:36 AM
Hi
i think you have to use a method which will not allow your ephone on your configuration , so please use one of the belwo
1-under telephony-service (srst mode auto-provision none).none—Does not include information for learned ephones or learned ephone-dns in the running configuration. Use this keyword when you want Cisco Unified CME to provide SRST fallback services for Cisco Unified Communications Manager.
or
2-usef call-manager-fallback will do the same.
call-manager-fallback instead of telephony-service
all phones will resgisters for SRST and you won't sees any ephone or ephone-dn on your running-config. You can use "show ephone registered" to check that all phones registered correctly.
Thank you
please rate all useful information
10-11-2013 04:41 AM
U hav to give no telephony- services
no ephone x
no ephone -dn all
10-11-2013 06:49 AM
In your case you are actually using SRST in CME mode. The Telephony-Service command invokes SCCP CME on the router. No biggie there. The auto-provision-none command provided earlier in the feed will work. If you prefer to minimize configuration on the router, you might consider switching to traditional SRST using the call-manager-fallback.
Here is a configuration guide to help out.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesrst.html
10-21-2014 11:01 AM
R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#no tel
R2(config)#no telephony-service
Reset-All: clean up DN 6 chan 1 (1237)
Reset-All: clean up DN 6 chan 2 (1237)
Reset-All: clean up DN 6 chan 3 (1237)
Reset-All: clean up DN 6 chan 4 (1237)
Reset-All: clean up DN 6 chan 5 (1237)
Reset-All: clean up DN 6 chan 6 (1237)
Reset-All: clean up DN 6 chan 7 (1237)
Reset-All: Sync DN 6 chan 8 (1237) and htsp
All DNs in DOWN state
Skinny Deleted entries for 3 phones
11-22-2017 01:07 AM - edited 11-22-2017 01:08 AM
Same problem for me.
Clear statistics or deactivate call-manager-fallback and reactivate it does not clear the logs.
Is there really no other option than rebooting the gateway ?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide