01-13-2011 06:07 AM - edited 03-16-2019 02:51 AM
Hi Guys
I must be missing something here but I have CUCM 7.0.1.11000-2 and want to update to 7.0.1.21015-1 to perform a restore. I have uploaded the device pack to the CUCM using the CLI and can see it when I click show\software however after a roboot it remains on the pervious version. I have checked Settings\Version and there only seems to be one active version to run with, can anyone help?
thanks
Ian
Solved! Go to Solution.
01-14-2011 06:04 AM
Hey Craig,
No worries my friend
This is why we are here to back each other up @ CSC. I figured you may be
referencing the DMA so I thought I would just would just add this note to augment
your great help.
Cheers!
Rob
01-17-2011 01:47 AM
Hi Guys
to conclude this thread I would like to confirm that I spoke to TAC and they very quickly posted the relevant release for download. I upgraded this through OS Admin and restored the system successfully. Thanks again for all the help
Ian
01-17-2011 02:08 AM
Ian,
Glad to hear every thing went smoothly,
Thanks for the update,
Craig
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide